Instruction Manuals:	Manual 1 (893 KB)
Tower Catalog Page:	177
E-mail This Page To A Friend

       This is the Futaba 3PM FM 3-Channel Surface Computerized Pistol
      Grip Radio with the R153F Receiver and two S3003 Standard Servos.

FEATURES: 10-model memory
          Alphanumeric LCD screen with high intensity Blue LED monitor,
            can be changed to three different brightness levels
          Condition switch-in specific functions low rates can be set up and
            switched with SW1 switch simultaneously during a run
          Alarm buzzer
          Model copy and clear functions
          ABS Braking
          Brake mixing for large cars
          One-channel program mixing
          Steering and throttle Expo
          Servo reversing on all channels
          End Point Adjustment (EPA) for all channels
          Multi-function timer up/down with lap memory
          Steering dual rates
          Throttle ATL
          Digital trims
          Function select dial/switch
          Steering speed
          Charge jack for optional NiCds
          One year warranty

INCLUDES: One 3PM FM Transmitter
          One R153F FM receiver (FUTL0364)
          Two S3003 Standard Servos (FUTM0031)
          One crystal set (FUTL97**)
          One receiver battery box w/"J"connecter (No Number)
          One switch harness        (FUTM4350)
          Two accessory package w/rubber grommet, screw, brass eyelet (FUTM3551
          One frequency flag set    (No number)
          One instruction manual    (No number)
          * Optional Transmitter NiCd: (FUTM1462) or FUTM1440
          * Optional Receiver NiCd:    (FUTM1295)
          * Optional NiCd Charger: (FUTM1830)

REQUIRES: 8 AA cells for transmitter and 4 AA cells for battery box (SANP3501
            SANP3500)

SPECS:    S3003 Servo:                       R153F Receiver:
            Torque: 56.9 oz-in (4.1 kg-cm)     Power Requirement: 4.8V or 6V
            Speed: .19 sec/60°                Length: 1.5" (37.7mm)
            Power Requirement: 4.8V or 6V      Width:   1" (25.4mm)
            Length: 1.59"  (40.4mm) Length:    Height: .6" (14.3mm)
            Width:   .78"  (19mm)              Weight: .50oz (14.1g)
            Height: 1.42"  (36mm)
            Weight: 1.31oz (37.2g)
          T3PM Transmitter:
            Modulation: FM (HRS/PPM switching possible)
            Power Requirement: 8 AA cells or NT8F700B NiCd battery (9.6V)
            Current Drain: 250mA or less

COMMENTS: If you would like to use optional NiCds with your transmitter, we
            recommend an assembled pack, not individual cells. If individual
            NiCd cells are used the battery tray could be damaged during
            charging.

                                                                    kkh12-05-03
                                                                         ir/jxs
                                                           updated jpg 12/16/04
                                                               updt jxs 6/15/06
                                                           updated jpg 08/29/07



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators