Tower Catalog Page:	60
E-mail This Page To A Friend

               This is the House of Balsa Electric P-51D Mustang.
                         All laser cut balsa parts.

FEATURES: All balsa and plywood construction
          Flat bottom, low wing configuration
          Full color photo illustrated instructions
          Full size rolled plans
          Self adhesive mylar decals
          Dubro hardware included
          Laser-cut parts make construction fast and super accurate
          Plastic exhaust stacks and canopy

INCLUDES: One page rolled plans
          Full color manual
          Clear plastic canopy and exhaust stacks
          All required hardware
          All necessary wood to construct model
          Two sheets of color decals

REQUIRES: Electric motor: such as an Astroflight 803G geared, 020 brushless, or
           long can Speed 400
          Radio: 4 channel with 4 micro servos
          Covering: 2+ rolls
          Two 2" (51mm) main wheels
          One 3/4" (19mm) tailwheel

SPECS:    Wingspan:        46.5" (1181MM)
          Wing Area:       390 sq.in (25.19 sq dm)
          Fuselage length: 33.5" (851MM)
          Weight with radio equipment: 38oz (1077.3g)
          Wing Loading:    14oz/sq. ft. (42.72 sq dm)
          Center of Gravity (CG): 2-5/8" (67mm) aft of the wing leading edge
            at the wing rib
          Control Surface Throws:
          Elevator, up and down:  5/16" (9mm)
          Rudder, left and right: 3/8" (10mm)
          Ailerons, up: 3/8" (10mm) up, 1/4" (11.5mm) down

                                                                   dda 12/20/03




– If you need more information, use these House of Balsa resources –

E-mail: HOBANDZAP@aol.com
Web Site: http://www.houseofbalsa.com
Phone: 760-246-6462


 
Postal Address:
House of Balsa
10101 YUCCA ROAD
ADELANTO, CA 92301  








Click here for Units of Measure Conversion Calculators