View Larger Picture

Additional Pictures:	Picture 1
On-line Videos:	Video 1 (2.4 MB)
Product Reviews:	Review 1
Instruction Manuals:	Manual 1 (612 KB) Manual 2
Tower Catalog Page:	25
E-mail This Page To A Friend

       This is the Radio Controlled, Glow Powered, Almost Ready-to-Fly
       Great Planes Cosmic Wind Little Toni Sport Pylon Racer Airplane.
                           27.5% scale (IMAA legal)
                 For Intermediate to Advanced Modeler/Fliers.

FEATURES: Construction: Fiberglass, balsa and plywood
          Wing: Balsa and plywood, one-piece
          Fuselage: Fiberglass, pre-painted and trimmed
          Covering: Top Flite True Red MonoKote, TOPQ0227
          Radio Compartment: Plywood reinforced
          Wheel Pants and Cowling: Fiberglass, painted to match covering scheme
          Canopy: Single, clear
          Landing Gear: Pre-painted aluminum .12" (3mm) thick w/ 2.25" (70mm)
            diameter foam main wheels, 1.25" (32mm) foam tailwheel,
            and pre-bent .08" (2mm) diameter wire tail gear
          Aileron Control: Dual servo
          Hardware: Full set included
          Motor Mount: Nylon adjustable
          Fuel Tank: 14.2oz (420cc) rectangular
          Spinner: 3" (76mm) aluminum
          Building Time: Ready to fly in 12-15 hours
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit free from defects in both materials and workmanship at date
            of purchase.

INCLUDES: Pre-built wing fuselage and tail assemblies prebent aluminum main
            landing gear, 2 main wheels, tailwheel wire with wheel, engine
            mount, hardware package, fiberglass cowling and wheel pants, clear
            canopy, decals, aluminum spinner, photo-illustrated instructions,

REQUIRES: Engine:  .61 cu in (10cc) 2-stroke
              OR   .91 (15cc) 4-stroke
          Muffler: Stock type supplied with engine, engine mounts at 90° angle
          Radio:   4-Channel
          Servos:  4-with at least 54 oz-in torque
                   1-with at least 30 oz-in torque (for throttle)
            (2-ailerons, 1-elevator, 1-rudder, 1-throttle)
          Servo Extension: Two 6" (152mm)-for ailerons
          Y-Harness: One-for aileron servos
          Misc. Items: glow plug, ¼" foam rubber padding, 3' medium
            fuel tubing, fuel filter, propeller, building and field equipment.

SPECS:    Wingspan:       63 " (1600mm)
          Wing Area:      775 sq in (50.06 sq dm)
          Weight:       7.25 - 8.25lb (3290 - 3740g)
          Wing Loading: 21.5 - 24.5 oz/sq ft (65 - 75 g/sq dm)
          Length:       56.5" (1435mm)
          Airfoil:      Fully symmetrical, low-wing configuration
          Center of Gravity: 3-3/8" (86mm) Measured from wing's leading edge
            at the fuselage sides.
          Control Throws-           Low Rate       High Rate
            Ailerons: Up & Down    ¼" (6.35mm)      3/8" (9.5mm)
            Elevator: Up & Down    ½" (12.7mm)        ¾"  (19mm)
            Rudder: Right & Left   ¾"   (19mm)    1-1/8"  (28mm)
          Incidence-
            Stab: 0°
            Bottom Wing: 0°
            Engine: +2° up, 3° right
          Dihedral-
            With one panel lying flat, tip of other panel should be 6" (152mm)

COMMENTS: Pilot head pictured on box is not included. A ¼-Scale Sportsman Pilot
            will fit under canopy.
           This spinner differs from the one shown in the manual. It includes a
             spinner adapter nut that fits the O.S. .61 two-stroke and .91 four
             stroke engines. It may be necessary to shorten the length of the
             spinner cone attachment bolt depending what propeller you choose.

           If a replacement fuel tank is needed, order the Sullivan 14oz
             Flextank (SULQ1742), or the DuBro 14oz tank (DUBQ0214).
             Some minor trimming and modifications may be required.

            To convert this airplane to Brushless motor power, the following
              items are required:
              KONG5060-Kontronik 600 Brushless Motor Set
              JTCG6801-Motor Mount
              7-cell NiMH 1900mAh batteries (3 required)
              Charger-Great Planes TRITON series
              APCQ4145-14x7 Prop for Electric Motors
              GPMQ4442-Servo Tape
              WSDM3001-Dean's Ultra Plug (quantity depends on how battery pack
               is assembled)
              GPMQ4610-6mm Prop Adapter
              Tie Straps

                                                                    jxs 2/25/04
                                                                         ir/jxs
                                                                updt wm 7/29/04
                                                              updt jxs 11/16/04
                                                               updt jxs 3/04/05
                                                              updt jxs 11/16/09



– If you need more information, use these Great Planes resources –

Click Here: Manufacturer's Product Web Page
E-mail: airsupport@greatplanes.com
Web Site: http://www.greatplanes.com/
Phone: 217-398-8970


 
Postal Address:
Great Planes
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators