Tower Catalog Page:	33
E-mail This Page To A Friend

        This is a Radio Controlled, Glow Powered, Almost-Ready-to-Fly,
              Phoenix Models Strega .40 Sport Scale Airplane.
               For Intermediate to Advanced Modeler/Fliers.

FEATURES: Construction: Balsa and plywood
          Wings: Two-piece all wood
          Covering: Factory applied Oracover
            The covering is all Orange except for the stabilizer top surface,
            it has a White stripe on each side
          Radio Compartment: Preinstalled servo tray
          Cowling: Pre-painted, Orange, fiberglass
          Canopy: Painted Silver and preinstalled
          Landing Gear: Fixed gear
          Aileron Control: Dual servos
          Building Time: Ready to fly in only 4-6 hours

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            pre-bent  5/32" main landing gear, 1/16" tailwheel wire,
            2-1/4" (57mm) main wheels, 1" (26mm) tailwheel, metal one-piece
            engine mount 10oz (296cc) fuel tank, 2-1/4" (57mm) spinner, wood
            servo tray and wing joiner, hardware package, photo-illustrated
            instructions, and foam rubber

REQUIRES: Engine: .40-.46 cu in (6.5-7.5cc) 2-stroke
              OR  .48-.53 cu in (7.9-8.7cc) 4-stroke
          Radio:   4- Channel
          Servos:  5- Standard, 1-throttle, 1-rudder, 1-elevator, 2-aileron
          Misc. Items: Glow plug, medium fuel tubing, fuel filter, propeller,
            building and field equipment.

SPECS:    Wingspan:     54.5" (1385mm)
          Weight:       5.2lb (2360g)
          Length:       46.6" (1185mm)
          Specs such as Wing Area and Wing Loading are not provided by the
            manufacturer
          Airfoil: Fully symmetrical, low-wing
          Center of Gravity: 4-15/16" (125mm) Back from the wing's leading edge
          Control Throws-
            Elevator: Up & Down      1/4" (6.35mm)
            Rudder: Right to Left 1-3/16"   (30mm)
            Ailerons: Up & Down      1/4" (6.35mm)

COMMENTS: If a replacement fuel tank is needed, order the Sullivan 10oz flex
            tank (SULQ1728), or the DuBro 10oz tank (DUBQ0210).
            Some minor trimming and modifications may be required.

                                                                   ajw 05-16-04
                                                                         ir/jxs



– If you need more information, use these Phoenix Models resources –

E-mail: airsupport@greatplanes.com
 
Postal Address:
Phoenix Models
1608 INTERSTATE DRIVE
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators