E-mail This Page To A Friend

        This is the radio controlled, nitro powered, four wheel drive
                   Team Associated Nitro TC3 Factory Team kit.
               This kit is a full race version loaded with over
           $200 worth of pro-level Factory Team upgrades and options.

FEATURES: Chassis: 0.10" (2.6mm) thick anodized aluminum
          Drive: Four wheel floating aluminum shaft drive
          Fuel Tank: With tank insert to make IFMAR capacity legal
          Clutch: Two-shoe
          Transmission: Two speed "Sure Shift" with a low 6.43:1 first gear for
            more low-end punch out of corners, and a higher 4.44:1 second gear
            for high top speeds
          Bearings: Full set, 20 total
          Shocks: Four coil-over oil-filled aluminum bodied VCS macro
          Spur Gears: 48 tooth  and 54 tooth
          Suspension: Pivot ball type with redesigned rear hub carrier
            rear suspension now accepts blade style anti-roll bar as used on
            the front suspension, wire type roll bar also included
          Brakes: NASCAR material pre-bonded pads
          Receiver Compartment: Enclosed
          Muffler: Dual chambered tuned pipe
          Bumper: Rubber mounted front floating foam with extra wide Kydex base
          Steering: Newly designed steering rack featuring nearly perfect
            Ackerman, (Ackerman describes the effect of the inside front
             wheel turning tighter than the outside front wheel).
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when when viewed from front or behind vehicle
          Turnbuckles: Blue titanium

INCLUDES: Nitro TC3 Factory Team chassis, four shocks, fuel tank, tuned pipe,
            linkages for both slide valve and rotary carbs, instruction manual
            Factory Team front one-way, air filter oil, wrenches, camber/toe-
            in gauge, track width/ride height tool

REQUIRES: Radio: 2-channel with two standard size servos
          Receiver Battery: 4 cell, 4.8V
          Radio Batteries: 8 AA size
          Engine: .12 or .15 rear or side exhaust non pull-start engine with
             rotary or slide valve carburetor, short or SG type crankshaft
          Starter: Starter box or electric hand-held starter with donut
          Fuel: Car fuel with 10-20% nitro and at least 16% lubricant content
          Tires and Wheels: Touring car type 12mm hex size
          Body: Touring car style, 200mm wide
          Misc Items: Fuel bottle, glow starter

SPECS:    Length:            15"    (381mm)
          Wheelbase:         10.25" (260mm) (wheels on-center front-to-rear)
          Ground Clearance:   1.37" (35mm)

COMMENTS: For replacement bearings use;
            Quantity      Size           Location            Order
             4         3/16" x 5/16"   outdrives           (2) DTXC1413
             4         3/8" x 5/8"     outdrives           (2) DTXC1437
             1         3/16" x 3/8"    front input shaft   (1) DTXC1423
             8         3/16" x 3/8"    fr & r hub carriers (1) DTXC1425
             1         5mm x 10mm      clutch              (1) DTXC1535
             1         5mm x 9mm x 3mm clutch              (1) ASCC4320
                         (flanged)

          For a high-performance O.S. Max engine upgrade order the .12TZ (P),
            and the Associated Rear Exhaust Manifold ASCC4350.

                                                                    jxs 3/16/04
                                                                         ir/jxs



– If you need more information, use these Associated resources –

Web Site: http://www.rc10.com/
Phone: 949-544-7500


 
Postal Address:
Associated
26021 COMMERCENTRE DR
LAKE FOREST, CA 92630  








Click here for Units of Measure Conversion Calculators