Tower Catalog Page:	33
E-mail This Page To A Friend

      This is the radio controlled, glow powered, Almost-Ready-to-Fly,
                Phoenix Models Extra 300S .46 scale airplane.
                     For intermediate to advanced fliers.

FEATURES: Construction: Balsa and plywood
          Wings: One-piece
          Covering: Adhesive backed factory applied, color scheme is Red with
            a thick White stripe on the wing and fuselage
          Radio Compartment: Plywood reinforced
          Cowling: Pre-painted fiberglass
          Canopy: Clear, single with painted pilot figure
          Wheel Pants: Pre-painted fiberglass
          Landing Gear: Pre-formed aluminum, 0.12" (3.5mm) thick, 0.078" (2mm)
            diameter tailgear, 2.25" (57mm) main wheels, 1" (25mm) tailwheel
          Aileron Control: Dual servo
          Building Time: Ready to fly in several hours

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            pre-bent main landing gear, tailwheel wire, 2.25" (57mm) main
            wheels, 1" (25mm) tailwheel, nylon engine mount, fuel tank, wood
            servo trays, 2.25" (57mm) spinner, wing joiner, 6.5" x 10"
            (165mm x 250mm) foam padding, pilot figure, decals, hardware
            package and photo-illustrated instructions.

REQUIRES: Engine: .46 cu in  (7.5 cc) 2-stroke
              OR  .52 cu in  (8.5 cc) 4-stroke
          Muffler: Sports-Style supplied with engine, engine mounts in upright
            position
          Radio: 4-Channel
          Servos: 5-Standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)
          Servo Extension 6": Two, for aileron servos
          Y-Harness: One, for aileron servos
          Misc. Items: Glow plug, glue, medium fuel tubing, fuel filter,
            propeller, building and field equipment.

SPECS:    Wingspan:     57.4" (1460mm)
          Weight:        3.52 lbs (1600g)
          Length:       50.3 " (1280mm)
          Specs such as Wing Area and Wing Loading are not provided by the
            manufacturer
          Airfoil: Fully-symmetrical, low-wing
          Center of Gravity: 3.5" (90mm) Back from the wing's leading edge
            at the fuselage
          Control Throws-
            Elevator: Up & Down   0.43" (11mm)
            Rudder: Right to Left 0.79" (20mm)
            Ailerons: Up & Down   0.31"  (8mm)

                                                                    jxs 5/24/04
                                                                         ir/jxs



– If you need more information, use these Phoenix Models resources –

E-mail: airsupport@greatplanes.com
 
Postal Address:
Phoenix Models
1608 INTERSTATE DRIVE
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators