Tower Catalog Page:	33
E-mail This Page To A Friend

       This is the radio controlled, glow powered, Almost-Ready-to-Fly,
             Phoenix Models Sea Bee Sport/F3A Pattern Airplane.
                For Intermediate to Advanced Modeler/Fliers.

FEATURES: Construction: Balsa and plywood
          Wings: One-piece all wood
          Covering: Factory applied Oracover, color scheme is Red and
            White with Blue and Yellow accents, Black lettering and Black stars
          Radio Compartment: Easily accessible over wing, plywood reinforced
          Cowling: Pre-painted, fiberglass-reinforced
          Wheel Pants: Pre-painted, fiberglass-reinforced
          Canopy: Single, clear with painted and detailed pilot bust
          Landing Gear: Two-piece pre-formed aluminum 0.16" (4mm) thick with
            two 2-1/4" (57mm) main wheels and tailwheel wire with 1" (25mm)
            tailwheel
          Spinner: 2-1/4" (57mm) Red plastic
          Aileron Control: Dual servo
          Building Time: Ready to fly in several hours

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            pre-bent main landing gear, tailwheel wire and wheel, main wheels
            mounted aluminum non-adjustable engine mount, fuel tank, spinner
            foam padding, pilot bust, wood servo trays and wing joiners,
            hardware package, decal sheet and photo-illustrated instructions

REQUIRES: Engine: .46 cu in (7.5 cc) high performance 2-stroke
              OR  .52 cu in (8.5 cc) 4-stroke
          Muffler: Sports-style supplied with engine, cowl requires trimming
            to accomodate engine and muffler
          Radio: 4-Channel
          Servos: 5-Standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)
          Servo Extension 6": Two for aileron servos
          Y-Harness: One for aileron servos
          Misc. Items: Glow plug, medium fuel tubing, fuel filter, propeller,
            building and field equipment.

SPECS:    Wingspan:     55.1" (1400mm)
          Weight:        6.1lb (2780g)
          Length:       53.9" (1370mm)
          Specs such as Wing Area and Wing Loading are not provided by the
            manufacturer
          Airfoil: Fully-symmetrical, mid-wing
          Center of Gravity: 4.3" (110mm) Back from the wing's leading edge
            at the fuselage
          Control Throws-          High Rate
            Elevator: Up & Down    0.47" (12mm)
            Rudder: Right to Left     1" (25mm)
            Ailerons: Up & Down    0.39" (10mm)
            Right thrust: 2°

                                                                    jxs 6/16/04
                                                                         ir/jxs



– If you need more information, use these Phoenix Models resources –

E-mail: airsupport@greatplanes.com
 
Postal Address:
Phoenix Models
1608 INTERSTATE DRIVE
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators