Parts Express Eligible:	Yes
E-mail This Page To A Friend

    This is the Castle Creations Pixie 7P Speed Control for Brushed motors.
       Will only work with Brushed motors. Will NOT work with Brushless.

FEATURES: Microprocessor controlled
          Low Resistance (.007 Ohms)
          High rate (2800Hz) switching (PWM)
          Up to 7A continuous current (with proper air flow)
          High output (1.2A) Battery Eliminator Circuit (BEC) provides power
            to receiver and servos- eliminates separate receiver battery
          Three to six cells with three micro servos
          Up to eight cells with two micro servos
          18 cells MAX with BEC disabled
          Programable LV Cutoff (none, 3.5V, 4.7V, 6V, 8V)
          Programable Motor Cutoff
          Programable throttle range
          Safe "Power On" arming program ensures motor will not accidentally
            turn ON
          Low Torque Soft Start prevents damage to fragile gearboxes
          Auto Shut Down when signal is lost or radio interference becomes
            severe
          Rugged Surface Mount Technology construction

INCLUDES: One Pixie 7P Micro ESC
          Instruction sheets

REQUIRES: Soldering into model motor system
          Soldering iron   HCAR0775
          Solder  WSDC4030
          Battery connector (depends what customer has)

SPECS:    Length: 5/8" (15mm)
          Width:  3/8"  (9mm)
          Height: 1/8"  (3mm)
          Wire Length: Motor end 4.5" (114mm)     Rx Connector: 6" (152mm)
                       Battery end: 4.5" (114mm)
                                                                   dda 05/09/04
                                                                         ir/jxs




– If you need more information, use these Castle Creations resources –

E-mail: support@castlecreations.com
Web Site: http://www.castlecreations.com/
Phone: 913-390-6939


 
Postal Address:
Castle Creations
235 S KANSAS AVE
OLATHE, KS 66061  








Click here for Units of Measure Conversion Calculators