View Larger Picture

Parts Express Eligible:	Yes
E-mail This Page To A Friend

      This is the Pixie-20 Sub Micro Motor Control from Castle Creations.

FEATURES: Microprocessor Controlled
          Low Resistance (.0027 Ohms)
          High Rate (2800Hz) Switching (PWM)
          Up to 20A Continuous Current (With proper airflow)
          High Output (1.5A) Battery Eliminator Circuitry (BEC)
            provides power to receiver and servos
          Five to Seven Cells with Four Micro Servos
          Nine to Ten Cells with Two Micro Servos
          18 Cells Max with BEC Disabled
          Programmable Motor Cutoff- Hard With Reset* or soft
          Programmable LV Cutoff (none, 5V*, 6V, 7.2V, or 8.4V)
          Fixed Throttle Range sets throttle to 1.25-1.75ms Fixed
          Programmable Throttle Range-Auto Calibrating* or fixed end points
          Safe "Power On" Arming Program Ensures Motor will not Accidentally
            turn ON
          Low Torque "Soft Start" Prevents damage to Fragile Gearboxes
          Auto Shutdown when signal is lost or rado interference becomes severe
          Rugged Surface Mount Technology Construction
             *Denotes Factory Settings*

INCLUDES: One P20 Pixie-20 Sub Micro Motor Control

REQUIRES: Wire Cutters, Wire Strippers, Soldering Iron (25-40W), Solder
           (Rosin Core), Battery Connector.

SPECS:    Width:               .43" (10.9mm)
          Height:              .29"    (7mm)
          Length:              .69"   (17mm)
          Weight:              12g with wires
          Input Voltage:       5-7C  w/Four Micro Servos
                               8C    w/Three Micro Servos
                               9-10C w/Two Micro Servos
                               18C Max w/BEC Disabled
          Max Rated Current:   20A continuous max w/proper airflow
          ON Resistance:       .0027
          Low Voltage Cutoff:  0V, 5V, 6V, 7.2V, 8.4V
          Heatsink:            Yes
          Connectors:          Universal Rx Connector. No Battery Connector.
           Switching Frequency: 2.8kHz
           For Motors Up To:    Speed 400
          Ratings with BEC Enabled:
            Servo Type:       5-7C:        8C:        9-10C:
           Standard Micro     4 Servos     3 Servos   2 Servos
           High Torque        3 Servos     2 Servos   Not Recommended
          Wire Gauge:
           Motor:              16AWG
           Battery:            16AWG

COMMENTS: Important Notes:
          Do not place a fuse in the circuit between the battery and speed
            control. You could lose control of the model.
                                                                    JiM 5.19.04
                                                                         ir/jxs



– If you need more information, use these Castle Creations resources –

E-mail: support@castlecreations.com
Web Site: http://www.castlecreations.com/
Phone: 913-390-6939


 
Postal Address:
Castle Creations
235 S KANSAS AVE
OLATHE, KS 66061  








Click here for Units of Measure Conversion Calculators