This is the PHX-45 Phoenix 45 Brushless Sensorless Speed Control.
FEATURES: Extremely Low Resistance (.0026 Ohm)
High Rate Adjustable Switching (PWM)
Up to 45A Continuous Current with Proper Air Flow, 60A surge
Five to Ten Cells with Four Micro
Up to 12 Cells with Three Micro
16 Cells Max (With BEC Disabled)
Dynamic Braking Ensures Folding Props Fold Promptly
BEC (3A) Provides Power to Receiver and
User Programmable Features:
Low Voltage Cutoff
Over Current Protection
Brake Type
Range-Fixed/Self Adjusting/Governor
Timing Advance
Cutoff Type
Soft Start Ramp Up
Switching Frequency
Runs Motor in Forward or Reverse
Auto Motor Cutoff with Reset
Safe "Power On" arming program ensures motor will not accidentally
turn ON
Low Torque "Soft Start" Prevents Damage to Fragile Gearboxes
Auto Shut Down When Signal is Lost or Radio interference
becomes severe
INCLUDES: One PHX-45 Phoenix 45 Sensorless Brushless Speed Control
REQUIRES: Wire Cutters
Wire Strippers
Soldering Iron (25-40W), HCAR0775
Rosin core solder
Battery Connector
SPECS: Width: .94" (23mm)
Height: .39" (9mm)
Length: 1.78" (45mm)
Weight: 35g with wires
Input Voltage: 5-10C w/Four Micro
12C w/Three Micro
16C Max w/BEC Disabled
Max Rated Current: 45A continuous max w/proper airflow
On Resistance: .0026
Low Voltage Cutoff: Adjustable: 4V, 5V, 6V, 7.2V, 9V, 12V
Connectors: Universal Rx Connector. No Battery Connector.
Switching Frequency: Adjustable: 11kHz, 22kHz, or 41kHz
Ratings with BEC Enabled:
Servo Type: 5-6C: 7-8C: 9-10C: 11-12C:
Standard Micro 5 5 Servos 4 Servos 3 Servos
High Torque 4 4 Servos 3 Servos 2 Servos
Wire Gauge:
Motor: 16AWG
Battery: 16AWG
JIM 5.19.04
ir/jxs
Click here for Units of Measure Conversion Calculators
|