This is the PHX-60 Phoenix 60 Brushless Sensorless Speed Control.
Ideal for Aveox 36xx. Astro 05, Hacker B40 and C40 motors,
Mega 2230 and 2245 and Kontronik 500 and 600 series Brushless motors.
FEATURES: Extremely Low Resistance (.0013 Ohm)
High Rate Adjustable Switching (PWM)
Up to 60A Continuous Current with Proper Air Flow, 80A surge
Five to Ten Cells with Four Micro
Up to 12 Cells with Three Micro
20 Cells Max (With BEC Disabled)
Dynamic Braking Ensures Folding Props Fold Promptly
BEC (3A) Provides Power to Receiver and
User Programmable Features:
Low Voltage Cutoff
Over Current Protection
Brake Type
Range-Fixed/Self Adjusting/Governor
Timing Advance
Cutoff Type
Soft Start Ramp Up
Switching Frequency
Runs Motor in Forward or Reverse
Auto Motor Cutoff with Reset
Safe "Power On" arming program ensures motor will not accidentally
turn ON
Low Torque "Soft Start" Prevents Damage to Fragile Gearboxes
Auto Shut Down When Signal is Lost or Radio interference
becomes severe
13AWG battery and motor wires
INCLUDES: One PHX-60 Phoenix 60 Sensorless Brushless Speed Control.
REQUIRES: Wire Cutters
Wire Strippers
Soldering Iron (25-40W), HCAR0775
Rosin core solder
Battery Connector
SPECS: Width: 1.05" (27mm)
Height: .45" (11mm)
Length: 2.35" (60mm)
Weight: 2oz (58g) with wires
Input Voltage: 5-12C w/BEC
5-20C Max w/BEC Disabled
Max Rated Current: 60A continuous max w/proper airflow
On Resistance: .0012 Ohm
Low Voltage Cutoff: Programmable
Connectors: Universal Rx Connector. No Battery Connector.
Switching Rate: Programmable (11kHz, 22kHz, or 41kHz)
Servo Ratings with BEC Enabled:
Servo Type: 5-6C: 7-8C: 9-10C: 11-12C:
Standard Micro 5 5 Servos 4 Servos 3 Servos
High Torque 4 4 Servos 3 Servos 2 Servos
jxs 6/25/04
ir/jxs
Click here for Units of Measure Conversion Calculators
|