Parts Express Eligible:	Yes
Tower Catalog Page:	182
E-mail This Page To A Friend

                 This is the Futaba Ball Bearing S9001 Servo.
             This servo has one servo horn attached, three extra
                    servo horns and mounting hardware.

         This servo can produce high-current draw from your batteries.
         If using NiMH or LiPo batteries, make sure they are capable
                          of delivering sufficient amps.

FEATURES: Final gear has a single ball bearing for fast transit time.
          Coreless motor for smooth and fast response.
          Ideal application for airplanes, sailplanes, helicopters, nitro or
            electric powered boats.
          Nylon gears
          One year warranty

INCLUDES: One Futaba Ball Bearing S9001 Servo with J connector and one 0.83"
            (21mm) round servo horn, one 1.38" (35mm) servo horn, one 4 point
            1.53" (39mm) servo horn, one 6 point 1.26" (32mm) servo horn, four
            rubber grommets, four 2mm x 11mm self-tapping phillips head screws
            and four brass eyelets.

REQUIRES: Phillips screwdriver to mount servo.

SPECS:    Dimensions: 1.6 x 0.8 x 1.4" (40 x 20 x 36mm)
          Weight: 1.7oz (48g)
          Torque: 54 oz-in (3.9 kg/cm) @ 4.8V
                  72 oz-in (5.2 kg/cm) @ 6V
          Transit Time: 0.22 sec/60° @ 4.8V
                        0.18 sec/60° @ 6V
          Warranty: Futaba warrants this servo for one year against defects in
            material or workmanship.

COMMENTS: If extra accessory bag is needed use Futaba part #FSH42 (FUTM3550).
          A note on coreless motors-a conventional servo motor has a steel core
            armature wrapped with wire that spins inside the magnets. In a
            Coreless design, the armature uses a wire mesh that forms a cup
            that spins around the outside of the magnet. This arrangement is
            much lighter resulting in smoother operation and faster response
            time.
                                                                    JXS 2/22/02
                                                              updt jxs 10/29/04



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators