Instruction Manuals:	Manual 1 (272 KB)
Parts Express Eligible:	Yes
Tower Catalog Page:	182
E-mail This Page To A Friend

   This is a Sail Control Winch Servo that has proper Winching Action with a
         Drum (rather than servo arms like other "sail winch" servos).

         This servo can produce high-current draw from your batteries.
         If using NiMH or LiPo batteries, make sure they are capable
                         of delivering sufficient amps.

FEATURES: High Torque and High Speed
          BEC set-up (a 5-6 cell pack powers the winch and the receiver
            the same way an Electronic Speed Control would)
          Water Resistant
          5-pole motor
          Metal Gears
          Two Ball Bearing
          Adjustable Trimmer (adjusts from two to six 360° revolutions) as
            increasing number of revolutions are dialed in, speed increases

INCLUDES: One S5801 Sail Winch Servo
          (Futaba J Receiver Plug, ON/OFF Switch and Tamiya-style battery plug)
          One Drum Adjuster Plastic Screwdriver
          One Illustrated Instructions Sheet

REQUIRES: 5-6 Cell Battery w/Tamiya Connector, use DTXC1900.

SPECS:    Torque:   108 oz-in @ 6V -  136 oz-in @ 7.2V
                    (7.8 kg-cm @ 6V - 9.8 kg-cm @ 7.2V)
          Servo Speed: 0.60 sec/360° rotation @ 6V
                       0.50 sec/360° rotation @ 7.2V
          Drum Travel:  2 to 6 Revolutions (adjustment range)
          Drum Diameter: 1.6"   (42mm)
          Length:        1.8"   (46mm) (excluding drum and mount flanges)
          Width:         1.0"   (25mm)
          Height:        1.7"   (44mm)
          Weight:        2.9oz (83g)
          Power Requirement: 6.0 - 7.2V NiCd battery (5 - 6 cells)
          Regulator output:  6.0V/1.5A (max) (power to the receiver)
          Drum Measurements:
          Height:    9mm  (.356")
          Width:  41.9mm (1.652")
          Width of each groove: 3.5mm (.140")
          Depth of each groove:13.7mm (.540")

                                                             5/13/96 eke
                                                                     ir/jl
                                                             11/13/02 JCT
                                                               updt jxs 3/30/03
                                                               updt jxs 2/24/04
                                                              updt jxs 10/29/04



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators