E-mail This Page To A Friend

       This is the GWS Pico-J3 Stick Indoor & Slow Flyer R/C ARF airplane
                      with the IPS-CB indoor power unit.
      This kit was designed for beginner to intermediate Modeler/Fliers.

FEATURES: Construction: Yellow Foam Fuselage with Yellow foam wing and tail
            sections
          Wings: Two piece foam wing
          Radio Compartment: Plastic parts which slide onto the fuselage
            channel
          Landing Gear: Pre-bent main and tail skid wires
          Hardware: Included
          Motor Mount: Plastic with preinstalled motor, shaft and gear
          Warranty: Grand Wing Servo-tech Company Ltd. guarantees this kit free
            from defects in both materials and workmanship at date of purchase.

INCLUDES: Foam wing halves, horizontal and vertical stabilizers, main landing
            gear and tail skid wires, two 2.4" (60mm) ultralight main wheels
            and 2.4" (62mm) tires foam fuselage channel, IPS-CB power unit
            with an EP1047 prop, spinner, photo-illustrated instructions,
            hardware, and decal sheet.

REQUIRES: Speed Control 10A recommended
          Battery: 6-7.2V 110-270mAh
          Charger: Timed or Peak
          Radio: 2-3 Channel with micro receiver
          Servos: 2 pico or naro series (sub micro or micro)
                      ( 1-elevator, 1-rudder)
          Misc. building and field eqipment

SPECS:    Wingspan: 39.8" (1010mm)
          Wing Area: 263 sq.in (16.99 sq dm)
          Weight: Not Supplied by Manufacturer
          Wing Loading: 4oz/sq ft (12.2g/sq dm)
          Length: 27.1" (690mm)
          Airfoil: Flat bottom high wing
          Center of Gravity: 2"-2.4" (51-60mm) back from the leading edge
            of the main wing
          Control Throws: Not supplied from manufacturer

COMMENTS: This version includes the IPS system with the EP1047 prop which is
          a 10x4.7 Electric Prop.
                                                                    EEW 9/28/04
                                                                         ir/jxs



– If you need more information, use these GWS resources –

E-mail: service@gws.com.tw
Web Site: http://www.gws.com.tw/
Phone: 909-594-4979


 
Postal Address:
GWS
GRAND WING SYSTEM USA, INC.
138 S. BRENT CIRCLE
CITY OF INDUSTRY, CA 91789  








Click here for Units of Measure Conversion Calculators