This is the Grand Wing Servo E-Starter Foam Trainer powered
by the EPS 400C power system.
This kit is designed for the beginner modelers/fliers.
FEATURES: Construction: Easy interlocking foam with built-in thrust angles
Wings: One-piece foam construction
Radio Compartment: Molded into
Cowling: Plastic
Landing Gear: Pre-bent 2mm diameter wire main gear with tail gear
wire.
Hardware: Included
Motor Mount: Included
Warranty: Grand Wing Servo Company Ltd., guarantees this kit free
from defects in both materials and workmanship at date of purchase.
INCLUDES: All foam halves,wing,and tail sections,plastic cowling,2mm
main landing gear, 1.2mm tail wire, 2" (50.8mm) diameter main
wheels, 1" (25.4mm) diameter tail wheel, plastic battery seat,
EP1060 prop, EPS400C power system, spinner, decals and photo-
illustrated instructions
REQUIRES: Speed Control: 20A recommended
Battery: 7.2-8.4V AAA 500-730mAh or
7.2-8.4V 270-400mAh 2/3 AA or AA 600mAh NiCd
Charger: Timed or peak
Radio: 3-4 channel
: 3 pico or naro (micro or mini) servo
(1-, 1-, 1-)
Servo Extension 6": For
Building and field equipment
SPECS: Wingspan: 37.8" (960mm)
Wing Area: 265sq in (17.1sq dm)
Weight: 16.9oz (480g)
: 9oz/sq ft (28g/sq dm)
Length: 30.54" (725mm)
Airfoil: High wing flat bottom
: Marked on the bottom of the wing, approximately
2.9" (73mm) behind of wing at side
Control Throws-
: Up & Down 5/16"(7.9mm)
: Up & Down 1/2" (12.7mm)
: Right & Left 1/2"(12.7mm)
Incidence-Not available per manufacturer
WM 10/13/04
ir/jxs
– If you need more information, use these GWS resources – |
E-mail: service@gws.com.tw
Web Site: http://www.gws.com.tw/
Phone: 909-594-4979
|
|
Postal Address:
GWS
GRAND WING SYSTEM USA, INC.
138 S. BRENT CIRCLE
CITY OF INDUSTRY, CA 91789
|
Click here for Units of Measure Conversion Calculators
|