Tower Catalog Page:	58
E-mail This Page To A Friend

           This is a Radio Controlled, Electric Powered, EPS Foam
                 GWS Spitfire w/EPS350C Sport ARF Airplane.
                For Intermediate to Advanced Modelers/Fliers.
    Recommended for modelers who have had trainer airplane experience and
                  also safely flown/landed low wing planes.

FEATURES: Construction: Easy interlocking EPS foam, with built-in thrust
            angles.
          Wings: One-piece, EPS foam
          Radio Compartment: Located above the wing
          Cowling: White polystyrene
          Canopy: Clear polystyrene
          Landing Gear: Pre-bent wire
          Hardware: Complete hardware package
          Motor Mount: Included
          Motor: EPS350C with ball bearing gearbox
          Propellers: Two included (EP8060=8x6 and EP9070=9x7)
          Wheels: 2" ultra-light main wheels and 1" ultra-light tail wheel
INCLUDES: All foam to construct the airplane, pushrods, prebent 2mm
            main landing gear,1mm tailwheel wire,hardware package,
            polystryene cowling, clear canopy, decals, GWS glue and
            photo-illustrated instructions.

REQUIRES: Speed Control: 10A or higher
          Battery:  7.2V-8.4V 400-600mAh NiCd or 8.4V-9.6V 730mAh NiMH
          Charger:  Charger capable of charging the selected flight battery
          Radio:   4 Channel
          Servos:  3 nano servos
                   (1-ailerons, 1-elevator, 1-rudder)
          Servo Extension: for aileron servo
          Misc. Items: building and field equipment

SPECS:    Wingspan:     34.5 " (876mm)
          Wing Area:    213.9 sq in (13.8sq dm)
          Weight:       14-15oz    (390g)
          Wing Loading: 9.5 oz/sq ft (28.3 g/sq dm)
          Length:       28.4" (720mm)
          Airfoil:      Semi-symmetrical, low-wing
          Center of Gravity: 2-5/16" (60mm) back from the wing's leading edge
            at the fuselage sides.
          Control Throws-           Low Rate       High Rate
            Ailerons: Up & Down   5/16"  (7mm)     1/2" (12mm)
            Elevator: Up & Down    1/4"  (6mm)     3/8" (10mm)
            Rudder: Right & Left   3/8" (10mm)     5/8" (15mm)

                                                                    ajw 6-29-04
                                                                         ir/jxs
                                                               updt jxs 9/16/09



– If you need more information, use these GWS resources –

E-mail: service@gws.com.tw
Web Site: http://www.gws.com.tw/
Phone: 909-594-4979


 
Postal Address:
GWS
GRAND WING SYSTEM USA, INC.
138 S. BRENT CIRCLE
CITY OF INDUSTRY, CA 91789  








Click here for Units of Measure Conversion Calculators