E-mail This Page To A Friend

                 This is the GWS A-10 Thunder Bolt Ducted Fan
                      Airplane with two 300 Size Motors.
               This aircraft is recommended for advanced fliers.
                       Also known as the "Warthog".

FEATURES: Construction: Gray colored foam, fully scale appearance
          Wings: One piece foam, low wing placement
          Fan Shrouds: Foam 2-piece
          Canopy: Single plastic
          Cockpit Features: Included decals for detailing
          Landing Gear: Pre-bent wire main and steerable nose gear
          Wheels: Two ultra light style 2" (51mm) main wheels and one 1.5"
            (38mm) nose wheel
          Aileron Control: Single servo
          Hardware: All necessary hardware included
          Warranty: GWS guarantees this kit free from defects in
            both materials and workmanship at the date of purchase.

INCLUDES: All foam fuselage,wings,and tail sections, 2 ultra-lite main wheels,
            1 ultra-lite nose wheel, main and tailwheel wire, plastic ducted
            fan units, foam fan shrouds, 2 300 size motors, Y-harness, photo-
            illustrated instructions, all necessary hardware, decals, and tube
            of glue

REQUIRES: Speed Control (20A)
          Battery: 6N400mAH AA NiCd or 6-7N500-730mAh NiMH AAA
          Charger: Timed or Peak
          Radio: 4 Channel with micro receiver
          Servos: 3 micro size (1-aileron, 1-elevator, 1-steerable nose gear)
          Servo Extension 6": One, for ailerons
          Misc items: Building and field equipment

SPECS:    Wingspan: 38.1" (968mm)
          Wing Area: 216 sq in (13.95 sq dm)
          Flying Weight: 14.6-16.37oz (414-464g)
          Wing Loading: 8.46-9.64oz/sq ft (25.8 -29g/sq dm)
          Length: 34.3" (872mm)
          Center of Gravity: 2" - 2.2" (50-57mm) back from the wing's leading
            edge at the fuselage sides.
          Control Throws-           Low Rate        High Rate
            Ailerons: Up & Down     .31"  (8mm)     .43" (11mm)
            Elevator: Up & Down     .43" (11mm)     .51" (13mm)
            Nose steering           .31"  (8mm)     .39" (10mm)

COMMENTS: GWS does not recommend exceeding 8.4V as this will cause permanent
            damage to the motors.

                                                                    jxs 7/15/05
                                                                         ir/jxs



– If you need more information, use these GWS resources –

E-mail: service@gws.com.tw
Web Site: http://www.gws.com.tw/
Phone: 909-594-4979


 
Postal Address:
GWS
GRAND WING SYSTEM USA, INC.
138 S. BRENT CIRCLE
CITY OF INDUSTRY, CA 91789  








Click here for Units of Measure Conversion Calculators