This is a A-10 Thunder Bolt,"Warthog" Slope Glider
from GWS
This kit was designed for intermediate to advanced modelers/fliers.
Recommended for modelers who have had trainer airplane experience and
also safely flown/landed low wing planes.
FEATURES: Construction: Easy interlocking White foam
Wings: One-piece foam wing
Radio compartment: Molded into
Cowling: Foam motor shrouds
Canopy: Plastic
Cockpit features: Instrument panel decals included
Control: Single servo required
Hardware: All necessary hardware included
Warranty: Grand Wing Servo Company guarantees this kit free from
defects in both materials and workmanship at date of purchase.
INCLUDES: All foam halves,wing,and tail,three .9mm diameter push rods,
one plastic tube,two 3x240mm bamboo sticks,two linkage
wires,one linkage wire,GWS glue,all necassary hardware,
plastic cowl,decals and photo-illustrated instructions.
REQUIRES: Battery: For receiver
Charger: Timed or Peak
Radio: 3-4 Channel
: 2 pico or naro size (micro or mini)
(1-, 1-)
Servo Extension 6": One (for )
Building and field equipment
Paint: Optional
SPECS: Wingspan: 38.1" (968mm)
Wing Area: 216 sq in (13.95sq dm)
Weight: 12.7-14.6oz (360-410g)
: 8.46-9.64oz/sq ft (25.8-29g/sq dm)
Length: 34.3" (872mm)
: 2"-2.2" (50-57mm) Back from the wing's leading
edge at the sides.
Control Throws- Low Rate High Rate
: Up & Down 8mm 11mm
: Up & Down 11mm 13mm
COMMENTS: This is the slope glider version which does not include the motor,
props, landing gear or plastic fan shrouds.
wm 10/12/04
ir/jxs
– If you need more information, use these GWS resources – |
E-mail: service@gws.com.tw
Web Site: http://www.gws.com.tw/
Phone: 909-594-4979
|
|
Postal Address:
GWS
GRAND WING SYSTEM USA, INC.
138 S. BRENT CIRCLE
CITY OF INDUSTRY, CA 91789
|
Click here for Units of Measure Conversion Calculators
|