This is the GWS radio controlled Formosa with
the EPS350C/BB electric power system.
For Intermediate to Advanced Modelers/Fliers.
Recommended for modelers who have had trainer airplane experience and
also safely flown/landed mid-wing/high-wing planes.
FEATURES: Foam construction
Wings: One piece foam wing
Cowling:Plastic one piece
Canopy:Foam cockpit cover
Landing gear:Pre-bent wire main and tail gear(1.6mm main 1.2mm tail)
Hardware:All necessary hardware included.
Warranty:GWS warranties this kit free from defects in materials and
workmanship at the date of purchase.
INCLUDES: Foam wing,tail,and ,plastic cowling,one EP1060 prop,one
EP9070 prop,one EPS350C with ball bearings motor and gear drive,
spinner,two 50.8mm ultra light wheel rims,one 25.4mm diameter
tail wheel,pre-bent main and tail gear wires,all necessary
hardware,GWS glue,decals and photo illustrated instructions.
REQUIRES:
Speed Control 20A
Battery 8.4V 400mAh ,8.4-9.6V 730mAh AAA cells
Charger
Radio: 4-5 Channel with micro or naro receiver
: - 3 pico/naro/micro/or mini servos
(1-, 1-, 1-,)
Servo Extension 6": For
Misc. Items: 1/4" foam rubber padding,building and field equipment.
SPECS: Wingspan:35.4"(900mm)
Wing Area:255.8 sq in (16.5 sq dm)
Flying Weight:12.7-14.8oz(360-420g)
:7.1-8.4oz/sq ft (21.8-25.5g/sq dm)
Length:35.9" (912mm)
Airfoil:Mid wing
:90mm(+or-) Back from the wing's
at the sides.
Control Throws- Low Rate High Rate
: Up & Down 2cm 3.5cm
: Up & Down 1.5cm 3.5cm
: Right & Left 3cm 5cm
Incidence-
Wing:N/A per manufacturer
Stabilizer:N/A per manufacturer
COMMENTS: GWS does not recommend exceeding battery voltage levels as this may
cause damage to the aircraft and will void the warranty.
wm 7/09/04
– If you need more information, use these GWS resources – |
E-mail: service@gws.com.tw
Web Site: http://www.gws.com.tw/
Phone: 909-594-4979
|
|
Postal Address:
GWS
GRAND WING SYSTEM USA, INC.
138 S. BRENT CIRCLE
CITY OF INDUSTRY, CA 91789
|
Click here for Units of Measure Conversion Calculators
|