E-mail This Page To A Friend

        This is a Radio Controlled, Electric Powered, foam construction
                  GWS PT17 W/EPS400C/BB Scale ARF Airplane.
                For Intermediate to Advanced Modelers/Fliers.
     Recommended for modelers who have had trainer airplane experience and
               also safely flown/landed high-wing planes.

FEATURES: Construction: Easy interlocking White foam, with built-in thrust
            angles.
          Wings: One-piece, White foam
          Radio Compartment: Located above the bottom wing
          Dummy radial engine
          Cockpit Features: Two seat cockpit, windshields and instrument decals
          Landing gear: NOT INCLUDED
          Hardware: Complete hardware package

INCLUDES: All foam to construct the airplane, pushrods, hardware package, foam
            dummy radial engine, GWS glue, decals, motor mount, prop shaft,
            and photo illustrated instructions manual.

REQUIRES: Speed Control: 10A or higher ESC
          Battery: 8.4V 270-400mAh NiCd or 8.4-9.6V 500-730mAh NiMH
          Charger: Charger capable of charging the selected flight battery
          Motor: EPS400C with ball bearing gearbox - GWSG2003
          Propeller: (EP1060=10x6) GWSQ2011
          Radio:   4-Channel
          Servos:  3 nano
                   (1-ailerons, 1-elevator, 1-rudder)
          Servo Extension 6": one needed for the aileron servo
          Misc. Items: building and field equipment
          Landing gear: We do not stock this part
          Main Wheels: GWSQ2205
          Tail Wheel: GWSQ2207

SPECS:    Wingspan:     38" (962mm)
          Wing Area:    403 sq in (26 sq dm)
          Weight:       18-20.5oz  (510-580g)
          Wing Loading: 6.4-7.3 oz/sq ft (19.62-22.31g/sq dm)
          Length:       30" (760mm)
          Airfoil:      Bi-Wing
          Center of Gravity: 0-3/8" (0-10mm) back from the bottom wing's
            leading edge at the fuselage sides
          Control Throws-           Low Rate       High Rate
            Ailerons: Up & Down    3/16" (5mm)     9/16" (15mm)
            Elevator: Up & Down    3/16" (5mm)     9/16" (15mm)
            Rudder: Right & Left   3/16" (5mm)     3/4"  (20mm)

COMMENTS:This is the slope glider version which does not include the motor,
          landing gear or prop and is unpainted. For the painted version with
          motor, landing gear and motor, order stock number GWSA1064.

                                                                  kpm10/06/2004
                                                                         ir/jxs



– If you need more information, use these GWS resources –

E-mail: service@gws.com.tw
Web Site: http://www.gws.com.tw/
Phone: 909-594-4979


 
Postal Address:
GWS
GRAND WING SYSTEM USA, INC.
138 S. BRENT CIRCLE
CITY OF INDUSTRY, CA 91789  








Click here for Units of Measure Conversion Calculators