This is a 1/2oz (15ml) jar of Exhaust (Buffing Metalizer)
Metalizer Lacquer For Airbrush Only.
FEATURES: Metalizer is a unique metalizing "plate" finish, especially
formulated for plastic models.
Metalizer system consists of a wide range of buffing and non-buffing
1/2oz colors which will allow the modeler to duplicate virtually
any natural metal finish.
Jar can be attached and used with most airbrush systems.
INCLUDES: One 1/2oz (15ml) jar of Exhaust (Buffing Metalizer)
Metalizer Lacquer
REQUIRES: Eye, Lung and Skin protection.
Testors #1409 Metalizer Sealer to go over paint and decaling.
Testors #1419 Metalizer Thinner to clean airbrush.
COMMENTS: Keep out of reach of children.
Contains Butyl Acetate.
Highly Flammable Paint, avoid heat, sparks or open flame.
Avoid eye contact, skin contact or prolonged breathing of vapors,
best to use in a well-ventilated area.
Warning: This product contains a chemical known to The State of
California to cause birth defects or other reproductive harm.
Inhaling contents is harmful to respiratory tract and nervous
system.
To use. Stir well. Airbrush light mist coats. Drys to touch in
30 minutes. Decal as usual. Seal with #1409 Sealer. Clean
airbrush with #1419 Thinner.
For Buffing, wait until after 10 minutes dry.
Recommended for ages 8 and over.
bmb 7/11/00
ir/jl
– If you need more information, use these Testors resources – |
Web Site: http://www.testors.com/
Phone: 800-435-2942
|
|
Postal Address:
Testors
PO BOX 73863
CLEVELAND, OH 44193
|
Click here for Units of Measure Conversion Calculators
| 
E-mail This Page To A Friend
