This is a 4 oz (118mL) Plastic Bottle of Thinner
used for Thinning Acrylic Model Master Acryl Paints.
FEATURES: Used specifically for thinning Model Master Acryl Paints.
Red plastic cap and stopper for storage purposes.
Small hole in the tip of bottle for drop-by-drop application.
INCLUDES: One 4 oz (118mL) Plastic Bottle of Thinner used for Thinning
Acrylic Model Master Acryl Paints
REQUIRES: Eye protection.
Removing red stopper and cap from bottle before use.
COMMENTS: Keep out of reach of children.
Contains Propylene Glycol
In case of eye contact, flush eye immediately and seek medical help.
Avoid prolonged skin contact.
For Brushing: Model Master Acryl should not need thinning for brush
applications. If thinning is required, add slowly - drop by drop -
to achieve desired viscosity. Try to thin only the amount of paint
needed for one session.
For Airbrushing: Most Model Master Acryl colors will airbrush without
thinning. The exception is the Figure Colors which have been
specifically formulated with a higher viscosity. A thinning ratio
of 4 parts paint to 1 part thinner is suggested for Figure Colors.
If more thinner is needed, add slowly - drop by drop. A rule of
thumb is to "thin to consistency of milk". Fine line detail air-
brushing requires practice and varies greatly with the
equipment and air pressure being used. Experiment on a scrap
before painting finished model.
JAL 7/31/00
ir/jl
– If you need more information, use these Testors resources – |
Web Site: http://www.testors.com/
Phone: 800-435-2942
|
|
Postal Address:
Testors
PO BOX 73863
CLEVELAND, OH 44193
|
Click here for Units of Measure Conversion Calculators
E-mail This Page To A Friend
