This is the Micro Duratrax Failsafe Unit.
FEATURES: Prevents runaway nitro or gasoline powered vehicles
Operates with both 4.8 and 6V batteries
Protects against low receiver battery power below 3.8V and loss of
radio frequency
Universal male and female plugs are compatible with Futaba, JR,
Hitec and Airtronics Z radio systems, see COMMENTS below
INCLUDES: One Duratrax Failsafe Unit with universal male and female plugs
REQUIRES: Use of or batteries, do NOT use ALKALINES
Connecting between receiver and servo
SPECS: Length: 0.92" (23.5mm)
Width: 0.67" (17mm)
Thickness: 0.23" (5.8mm)
Weight: 0.18oz (5g) approximate
Length of Wires: 2.75" (70mm) approximate
COMMENTS: Be certain radio system uses center red positive receiver/servo
connections.
Set-up:
1. Turn on your transmitter and power to your receiver.
2. From your transmitter , set the amount of brake you
would like applied to the /brake servo when Failsafe
is activated from loss of signal or battery power.
3. While holding this position from your transmitter,
push and hold the "set" button on the Failsafe for 2 seconds
until the red LED is illuminated. The Failsafe position is
the same for both battery and signal Failsafe.
*******This is only for AM and FM systems.******
Updated JBM 1-12-06
jxs 10/18/04
ir/jxs
Update EEW 9/25/06
updated jpg 3/7/07
Click here for Units of Measure Conversion Calculators
|