This is the Metal Gear Conversion Gear Set for the HPI SF-2 Servo.
INCLUDES: One steel gear/output w/two ball bearings pre-installed (Bearings are
Not available separately.)
Two brass/metal gear
One top case w/SF-3 label
2 screws
1 washer
Instructions
REQUIRES: HPI SF_2 servo
SPECS: Top case length: 1.6" (39.7mm) excluding flanges
width: 0.77" (19.6mm)
Screws: 1- 3x12mm
1- 3x10mm
Washer: 1- 4x8mm
jpg 9/5/04
ir/jxs
Click here for Units of Measure Conversion Calculators
|