Parts Express Eligible:	Yes
Tower Catalog Page:	220
E-mail This Page To A Friend

     This is a Deluxe Smoke Pump that Adds Smoke Effects to R/C Airplanes.

    This allows modelers to achieve realistic smoke results from any .40 to
  giant scale plane quickly and easily.  This unit only pumps the smoke oil to
a heating coil in the muffler, it does not heat the oil.  This can be used as a
 smoke system with gas or glow engines but CANNOT be used to pump raw gasoline.

FEATURES: Simple installation that requires NO complicated plumbing, soldering,
            or wiring.
          Does not require a servo or pushrods.
          Does not even require a pressurized tank or crankcase pressure.
          Single universal connector compatible with Futaba, Aitronics Z,
            Hitec S and JR.
          Pump plugs into a spare receiver channel, plus a built-in switch
            provides ease of operation from your radio.
          180 day warranty.

INCLUDES: One Self-Contained Unit with pre-installed receiver connector
          One Remote Pressure Adjustment Flow Valve
          One 4-Foot Length of clear yellow smoke oil Tubing.
          One 4" (101mm) length of Neoprene tubing
          One High-Volume Check Valve
          One T-Fitting (For Twin Cylinder Engines)

REQUIRES: Plugs into a spare channel on the receiver.
          4.8 to 6 volt Receiver Battery
          Smoke Oil (MDWP1000 is recommended by manufacturer)
          Smoke fluid tank
          Smoke muffler specifically designed for use with the modelers
            engine (make and model are specific).
          Silicone tubing (Between Check Valve and Muffler)(See COMMENTS)

COMMENTS: The difference between the regular smoke pump and the deluxe smoke
            pump is that the deluxe comes with a high volume check valve
            and smoke oil tubing
          If using original Airtronics Connectors, they will need to be
            Re-Wired to Z-Style Connectors so the polarity will be correct.
  Tubing- Silicone tubing withstands high heat better and longer than Tygon
            tubing, and Silicone Does Not Hold Up To Smoke Oil for extended
            periods of time, so it will need to be replaced periodically.
          Neoprene tubing is heat resistant and withstands smoke oil and
            other petroleum based liquids.  This would be a another alternative
            to the Tygon tubing included compared to silicone tube.
            Dubro manufactures neoprene tube of the correct size, use DUBQ0455

           The booklet "Secret Smoke Success Tips" formerly included is now
             available as a free Adobe Acrobat e-book download from the Tejera
             Microsystems website that is readable on all popular operating
             systems.  Alternately the booklet is available on a CD directly
             from Tejera Micro Systems.

                                                                    10/1/98 MAF
                                                                          ir/jl
                                                               updt jxs 4/12/04
                                                               updt jxs 6/05/05
                                                              updt jxs 10/04/05



– If you need more information, use these TME resources –

E-mail: http://www.tmenet.com/contact.htm
Web Site: http://www.tmenet.com/
Phone: 813-661-2649


 
Postal Address:
TME
TEJERA MICROSYSTEMS ENGINEERING
11705 BOYETTE ROAD #418
RIVERVIEW, FL 33569  








Click here for Units of Measure Conversion Calculators