View Larger Picture

Additional Pictures:	Picture 1
Instruction Manuals:	Manual 1 (1.3 MB)
Tower Catalog Page:	35
E-mail This Page To A Friend

  Top Flite's Gold Edition P-51D combines Easy Construction with Scale Fighter
Looks.

FEATURES: Realistic scale details: Vacuum-Formed Canopy with Molded-In Relief
            Detail and Vacuum-Formed Exhaust Ports, Machine Gun Exits and Cowl-
            Halves molded from ABS are accurately reproduced and make it easy
            for the average modeler to achieve stunning results.
          The same Fine Quality Materials, Simplified Construction Methods
            and step-by-step Instructions as all Gold Edition kits.
          Two-piece, Molded Oil-Cooler Scoop seams on the centerline and has
            a die-cut internal structure for a very close to scale appearance.
          Two huge sheets of excellent, high quality decals included for "Big
            Beautiful Doll" scheme (but does NOT include the checkerboard
            cowl decal).
          Fuselage has a very accurate, exact scale outline with scale tail-
            wheel location.
          Fully-Sheeted Fully-Symmetrical Wing w/Excellent Flight Performance.

INCLUDES: All Balsa and Plywood to Complete the kit, Clear Canopy, ABS Cowling
            and Detailing parts, Wire Landing Gear, Decals, Illustrated
            Instruction Manual, CAD-produced Rolled Plans, Pushrods, and
            Hardware.

REQUIRES: .60-.90 (2-stroke) or .90-1.20 (4-stroke) Engine
          4-6 Channel Radio (5th & 6th channels for retracts and/or flaps)
          4-7 Servos
          Engine Mount, Fuel Tank, 4" Spinner, 3¼"-4" Main Wheels, 1¼"
            Tailwheel, Wheel Collars, Fuel Tubing, Foam Rubber, Building and
            Field Equipment
          Two Rolls of Covering (plus trim colors)

SPECS:    Wingspan:  65"            CG: 3-7/8" back from Leading Edge Break
          Wing Area: 734 sq inches     (LE break is point where LE goes from
          Weight:    8-10lbs           steep sweep near fuse to shallow angle)
          Length:    56.5"          (throws are listed below:)
          Wing Loading: 25 to 30oz/sq ft
          Scale: 1:7
          Degrees Incidence: Engine Thrust:  1.75° down,  1.6° right
                             Stabilizer:     0°
                             Wing:          .5°
          Control Throws-                     High        Low
                             Elevator:       11/16"      7/16"
                             Rudder:         1-1/8"      7/8"
                             Ailerons:       11/16"      1/2"
                             Flaps:          1-1/16"     1-11/16"

COMMENTS: For Optional items use the following:  *see below for long struts*
            Robart Pneumatic Retracts                ROBQ0005
            Air Control Kit for Robart Retracts      ROBQ2302
            Robart Hinge Points for the flaps        ROBQ2509
            100 psi hand pump and gauge              ROBQ2363
            Robart Robostruts for landing gear, use ROBQ1705 and ROBQ1706.
            See Accessories Needed for additional items.
            See below for notes on cockpit kit.
          Cockpit Note: Unfortunately the tooling and design costs to make the
            engineering changes to the fuselage are prohibitive for the
            adaptation of a cockpit kit.
            As such, there is no cockpit/interior kit available for this model
            at this time.                                   Per RTJ-PM,1999 AMC
          Though a .90 size engine will fit into this plane there is no
            in-cowl muffler that will work with a .90.                  5/31/00
                                                                   upAXY 8/9/95
          Decal sheet P516D01 sold only through GP Manufacturing includes:
            Two 15" x 3¾" Black & Red WZ1
            9" x 2" Black & Red Big Beautiful Doll
            2¾" x 7/8" Col JD Landers
            1¾" x ¾" Black & White crew listing
            4-5/8" x 2-1/8" instrument panel
            Five 3/8" x ½" Red & White "Rising Sun" kills
            30 3/8" x ½" Red, White & Black German kills
            Two 3¼" x 7/8" Black 472218
            Two 7/8" White & Black fuel inlets
            2¼" x 5/8" Black air intake
            1" Red & White circle
            1/8" Black block letters:
              Caution! Replace Cover, Ammo Can Access, Gun Access (2), Aileron
              Servo Access, Aux. Equip. Access, Lockout Valve, Tie Down,
              Control Access, No Step (4), No Push (4).
            1/16" Black block letters:
              No Push (4), No Step (4).
          Decal sheet P516D02 sold only through GP Manufacturing includes:
            Two 9-1/8" x 4-3/8" Blue & White stars and bars
            Two 12-1/8" x 6" Blue & White stars and bars
                                                                     sdw 7/02



– If you need more information, use these Top Flite resources –

Click Here: Manufacturer's Product Web Page
E-mail: airsupport@topflite.com
Web Site: http://www.top-flite.com/
Phone: 217-398-8970


 
Postal Address:
Top Flite
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators