View Larger Picture

Instruction Manuals:	Manual 1 (1.4 MB)
E-mail This Page To A Friend

        This is a radio controlled, glow powered, Almost-Ready-to-Fly,
               Goldberg SR. Falcon ARF .40 sport scale airplane
                For Intermediate to Advanced Modeler/Fliers.
   In the late 1970s this classic bird was the first model airplane to fly
         across the United States. The trip covered 3026 miles from
                     Kitty Hawk NC to Oceanside CA.
Back in the 60s and 70s this kit was a 60 size airplane but with today's engine
 technology, the SR Falcon flies better than ever with a .40-.46 size engine.

FEATURES: Construction: Balsa and plywood construction
          Wings: One-piece, all wood construction
          Covering: High quality heat-shrink
          Radio Compartment: Pre-installed plywood radio tray
          Cowling: Balsa wood cowling
          Canopy: Clear canopy
          Landing Gear: Pre-bent 4mm diameter wire main and tail gear
          Aileron Control: Dual servo
          Warranty Period: 90 days

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
           pre-bent 4mm diameter main landing gear, 4mm diameter nose gear
           2.75" Wheels (3), built-in wood engine mounting rails, 6.5oz (190cc)
           fuel tank, wood wing joiners, hardware package, decals, hardware
           package and photo-illustrated instructions.

REQUIRES: Engine: .40 -.46 (6.5 - 7.5cc) 2-stroke
          Muffler: Sports-Style (Engine mounts in an upright position)
          Radio: Minimum 4-channel
          Servos: 5 standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder)
          Y-Harness: 1 required for aileron servos
          Misc. Items: Glow plug, 1/2" foam rubber, medium fuel tubing, fuel
            propeller, 2.25" spinner, building and field equipment.

SPECS:    Wingspan: 69" (1752mm)
          Wing Area: 810 sq in (52 sq dm)
          Weight: 6-7lbs (2721-3175g)
          Length: 53" (1346mm)
          Airfoil: Semi symmetrical high wing
          Center of Gravity: 3.50" (89mm) Back from the wing's leading edge
          Control Throws-            High Rate        Low Rate
            Elevator: Up & Down   3/16"    (5mm)    5/16"  (8mm)
            Rudder: Right to Left 9/16"   (14mm)    9/16" (14mm)
            Ailerons: Up & Down    1/4" (6.35mm)     3/8" (10mm)
                                                                  kpm11/03/2004
                                                                         ir/jxs



– If you need more information, use these Goldberg resources –

Click Here: Manufacturer's Product Web Page
E-mail: productsupport@greatplanes.com
Web Site: http://www.carlgoldbergproducts.com/
Phone: 217-398-8970


 
Postal Address:
Goldberg
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators