E-mail This Page To A Friend

MonoKote is a patented, flexible Flat-finish polyester film that is inexpensive
easy, clean, and (when compared to "old fashioned" coverings) quick to use.

     For great covering ideas and to insure a professional finish, order
             the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
   Super strong with a tensile strength of 25,000 psi (pounds/sq in)
   Lightweight at only 0.2 oz/sq ft
   Dry adhesive activates when heat is applied
   Shrinks to a drum-tight finish as it cools
   Flat finish
   Fuelproof and waterproof
   Stronger and lighter than traditional silk and dope coverings
   May be cleaned with glass cleaner, "409", or MonoKote Cleaner/Polish

INCLUDES:  One roll (25' x 26") Flat Dove Gray covering, instructions

REQUIRED:  Sealing Iron (TOPR2100      Heat Gun (TOPR2000)
           Iron Sock (TOPR2175)

COMMENTS:
   Not for use directly on foam! Suggest EconoKote for foam (TOPQ2601-TOPQ2614
  Matching MonoKote Trim Sheet (gloss): NONE
  Matching MonoKote Covering (gloss): TOPQ0211
  Matching EconoKote Covering (gloss): NONE
     (EconoKote can be used on top of MonoKote, but not under MonoKote.)
   If using 3 or less rolls of the same color, suggest a 6' roll (TOPQ0511).
   Temperature ranges:
      Attaching to wood (activating the glue):  215 - 240°F
      Partial shrinkage:  230 - 270°F
      Maximum shrinkage:  270 - 350°F
   NOTE: FLAT MonoKote tends to use a higher heat to apply (approx. 275 F).

                                                                    4-10-98/eke
                                                                          ir/le
                                                                            JAL
TECH NOTE: The characteristics of the flat MonoKote differ slightly from
           standared MonoKote covering:
           Flat MonoKote requires higher temperatures to apply than standard
           MonoKote because of the flat finish. In addition to the higher temp
           settings, this covering may require the iron to be in contact with
           the covering and wood slightly longer than the standard finish.
           If this covering is applied too loosely, it may be difficult to get
           a tight shrink with this product. Also, when applied loosely, it
           could become impossible to remove any wrinkles that may appear.

                                                            updated 4/30/03 ldt



– If you need more information, use these Top Flite resources –

Click Here: Manufacturer's Product Web Page
E-mail: airsupport@topflite.com
Web Site: http://www.top-flite.com/
Phone: 217-398-8970


 
Postal Address:
Top Flite
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators