View Larger Picture

Tower Catalog Page:	58
E-mail This Page To A Friend

               This is the radio controlled, Almost Ready to Fly
                          GWS Formosa II Slope Glider.
                        For Intermediate Modeler/Fliers.

FEATURES: Construction: Foam, two-piece fuselage
          Wings: One-piece foam
          Battery Compartment: Located on bottom of wing, plastic cover
          Cowling: Molded White plastic
          Canopy: Single, clear
          Landing gear: .08" (2mm) diameter pre-bent wire main
            and .04" (1mm) diameter tailwheel
          Wheels: Two 2" (51mm) foam main wheels and one 1" (25mm) tailwheel
          Aileron Control: Dual servo
          Hardware: Full set included
          Warranty: GWS Model Manufacturing Company guarantees this kit free
            from defects in both materials and workmanship at date of purchase.

INCLUDES: GWS Formosa II Slope Glider with decals, plastic cowl, landing gear,
            three wheels, 30g ballast clay, 24g tube of GWS glue, photo-
            illustrated instruction manual, pushrods, linkages and hardware

REQUIRES: Radio: 4-6 Channel
          Servos: 4 Micro (naro) for glider operation
                      (2-ailerons, 1-elevator, 1-rudder)
          12" (304mm) Servo Extensions: Two for alierons
          Battery: 3S1P LiPo 2200mAh or more
          Battery Charger: LiPo compatible
          Misc. Items: CA and epoxy glues, tools and field equipment

SPECS:    Wingspan: 42.5" (1080mm)
          Wing Area: 368.9 sq in (23.8 sq dm)
          Empty Weight: 10.9oz (309g)
          Flying Weight: 25.4oz (720g)
          Wing Loading: 9.9 oz/sq ft (30.20 g/sq dm)
          Length: 43.3" (1100mm)
          Airfoil: Fully-symmetrical, mid-wing placement
          Center of Gravity: Because of the variety of power systems and
            battery combinations available for this model no CG or control
            throw specs were listed. Contact GWS for further information.

COMMENTS: Can be built as a tail dragger or with landing gear.
          This glider can be converted to electric power using a variety of
            power systems, speed controls and propellers.

          Do not use CA glue to assemble, it will destroy the foam.

                                                                   jxs 01/17/06
                                                                         ir/jxs



– If you need more information, use these GWS resources –

E-mail: service@gws.com.tw
Web Site: http://www.gws.com.tw/
Phone: 909-594-4979


 
Postal Address:
GWS
GRAND WING SYSTEM USA, INC.
138 S. BRENT CIRCLE
CITY OF INDUSTRY, CA 91789  








Click here for Units of Measure Conversion Calculators