On-line Videos:	Video 1 (20.8 MB)
Instruction Manuals:	Manual 1 (99 KB)
Parts Express Eligible:	Yes
E-mail This Page To A Friend

      Great for small, fast, high performance airplanes, from flat foams
       to built-up 3Ds ElectriFly's Ammo Brushless Motors are designed
   and produced with high quality, power, precision and efficiency in mind.
    All 20 size Ammo motors share the same physical size and construction,
                but differ in kV (rpm per volt) power ratings.

FEATURES: Sensorless design requires a Sensorless Electronic Speed Control
          Slotless design that offers numerous performance advantages including
           Patented method for overlapping the winds allows for more copper
            to be packed inside the can to generate exceptional power
           No heavy iron teeth with air gaps in between results in no cogging
            which increases efficiency, responsiveness, and power output
            compared to cheaper slotted motors
          Precision bearings make these motors very reliable and virtually
           maintenance free (ABEC3 shielded)
          Uses Neodymium "rare earth" magnets which are the strongest permanent
           magnets available with one of the highest temperature ratings in
           radio control at 302°F (150°C)
          Uses magnet wires with one of the highest temperature ratings in
           radio control at 392°F (200°C)
          Can be used for direct-drive or geared applications
          Very low RF and electromagnetic interference, poses less risk to
           on-board radio control radio system
          Two sets of mounting holes (one set of holes is spaced 16mm apart,
           requiring 2.5mm machine screws. A second set of holes is spaced
           16.8mm apart, requiring screws which are 3mm in diameter)
          Stainless steel output shaft
          Two year warranty

INCLUDES: One Ammo motor
          Three high performance, gold plated, 4mm male bullet connectors

REQUIRES: An Electronic Speed Control such as the Electrifly SS25 (GPMM1820)
          A 2mm prop adaptor if using direct drive
          A gearbox if wanting to run geared (not currently available)
          Three gold plated, 4mm female bullet connectors - GPMM3115

SPECS:    Length: 1.57" (40mm)
          Diameter: 0.79" (20mm)
          Shaft diameter: 0.08" (2mm)
          Shaft length: 0.32" (8mm)
          Weight: 2oz (57.7 grams)
          Input voltage: 7.2-12V DC
          RPM per volt (kV): 3,600
          Max. Constant Current: 10-12A
          Max. Surge Current: 18-20A

COMMENTS: We currently do not stock the 2mm prop adaptor or gearbox.
          They are in the works and available in the near future.

          For Gold Plated Bullet Connectors order;
            GPMM3110 Gold Bullet Connector Male 2mm (3)
            GPMM3111 Gold Bullet Connector Female 2mm (3)
            GPMM3112 Gold Bullet Connector Male 3.5mm (3)
            GPMM3113 Gold Bullet Connector Female 3.5mm (3)
            GPMM3114 Gold Bullet Connector Male 4mm (3)
            GPMM3115 Gold Bullet Connector Female 4mm (3)

   These may be used with the MX400 heli with the use a pinion gear that fits
   2mm shafts(GWSE2046).
                                                                  kpm 11/9/2004
                                                                         ir/jxs
                                                               updt jxs 3/16/05
                                                                updt wm 8/07/06
                                                                updt oa 5/29/07



– If you need more information, use these Great Planes resources –

Click Here: Manufacturer's Product Web Page
E-mail: airsupport@greatplanes.com
Web Site: http://www.greatplanes.com/
Phone: 217-398-8970


 
Postal Address:
Great Planes
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators