Get a great Fun-fly model with a great price in the Tower Hobbies Uproar 40
model airplane kit.
INCLUDES: Die-cut plywood and balsa wood for construction, pushrods, canopy,
control horns and miscellaneous hardware.
REQUIRES: .32-.40 2 stroke or .40-.48 4 stroke engine, 4 channel radio with 5
(2 servos run the ), a , 2 rolls of covering,
miscellaneous hardware (see primary required items in the ACG),
& miscellaneous building & field equipment. Also requires a
2½" to 2¾" spinner or a prop nut.
SPECS: Wing span: 48" Wing area: 578 sq in Length: 42"
: 14-16 oz sq ft Weight: 3.5-4lbs
: 3" (76.2mm) back from the wing
COMMENTS: There are NO DECALS included. See "Notes" below.
The wing is Glued to the (not bolted)
Made of all wood
Semi-symmetrical wing
kpm 8/31/95
ir/jl
Control Throws: High Rate Low Rate
½" up 3/8" up
½" down 3/8" down
1" right Same as high rates
1" left
: ¾" up 3/8" up
¾" down 3/8" down
NOTES: Replacement parts are available through Great Planes.
Please see the parts listing on the web page for this kit
here at www.towerhobbies.com for full parts listing and parts
purchasing information.
The Purple Tower Hobbies arrow logo decal that is in the kit can
be obtained through GP Manufacturing (DECAL013).
Click here for Units of Measure Conversion Calculators