This is a PROFILE TOWER FUN P-51D (flat ) Aerobatic Airplane.
***The correct leading/edge balsa wood size is 1/4" x 1-1/4" x 24".***
***The parts list is correct.***
***In the manual on page 12, it says 1/4"x1-1/8"x24"-this is incorrect.***
FEATURES: Quick building time (approximately 24 hours).
Profile for great knife edges and 3D maneuvers.
D-tube wing with symmetrical airfoil and fully sheeted
Plywood engine mount rails for solid engine mounting.
INCLUDES: Full-Sized Rolled Plans, Photo-Illustrated Instructions, Aluminum
Main Landing Gear, Pushrods, and Basic Hardware.
REQUIRES: Radio: 4 Channel (, , , throttle)
: 5 Standard
(for )
Engine: .35-.50 (2-stroke) or .40-.52 (4-stroke)
Covering: Two 6 Foot Rolls
Misc. Items: 4oz Fuel Tank, Fuel Tubing, 2½" Main Wheels, 1"
Tailwheel, Wheel Collars, 2½" Spinner, Foam Rubber, Building and
Starting Equipment.
SPECS: Wingspan: 44" (1120mm)
Wing Area: 630 sq. in. (40.6 sq dm)
Weight: 3.5-4.0lbs (1590-1810g)
: 13-15 oz/sq ft (40-46g/sq dm)
length: 34.5" (880 mm)
Airfoil: Fully-Symmetrical Mid-Wing
COMMENTS: The kit is pictured on the box with Missle Red, Black, White and
Aluminum covering.
There are no decals included with this kit JAL 12/17/97
ir/jl
Replacement parts are available through Great Planes.
Please see the parts listing on the web page for this kit
here at www.towerhobbies.com for full parts listing and parts
purchasing information.
Click here for Units of Measure Conversion Calculators
|