Tower Catalog Page:	194
E-mail This Page To A Friend

       This is the Tower Pro .46 2-Stroke R/C ABC SNL Engine w/Muffler.
       Tower .46 Engines have a 2-YEAR Warranty Through Hobby Services.

        Free Postage When You Order Parts Through Tower Hobbies and a
            Doubled Warranty When You Join the Super Saver Club.

FEATURES: CNC (Computer-Numerically-Controlled) Machining for Exact Tolerances
          One-Piece Aluminum Crankcase
          Two Ball Bearings Support the Crankshaft
          True ABC (Aluminum, Brass, Chrome) Construction (see COMMENTS)
          Schnuerle Porting
          Expansion Style Muffler w/Pressure Fitting & Rotatable Exhaust Outlet
          Side Exhaust
          Remote Needle Valve for Safer, Easier Needle Adjustment Having a
            Sturdy Metal Mounting Bracket.

INCLUDES: One Assembled Engine w/Purple Anodized Head and Thrust Washer
          One Carburetor w/High & Low Speed Needle Valves
          One Metal Needle Valve Mounting Bracket w/Needle Valve Assembly
          One Expansion-Style Muffler
          Two 3x39mm Muffler Screws
          One Extra Head Gasket
          One Exhaust Gasket
          One 2.5mm Allen Wrench
          One 1.5mm Allen Wrench
          One Set of Instructions

REQUIRES: Glow Plug: OS Max #8 is recommended (OSMG2691)
          Break-in Propeller: 10x7
          Fuel with 5% - 15% Nitromethane and 18% (minimum) Lubricant Content

SPECS:    Displacement: 7.5cc (.455 cu in)
          Bore:         22mm (.866")
          Stoke:        19.6mm (.772")
          Horsepower:   1.75 BHP at 16,000 RPM
          Weight:       475g (16.9oz) (with Muffler)
          Length:       83mm (3¼") From Backplate to Front of Drive Washer
                        17.55mm (11/16") Front to Rear Mounting Hole Centers
          Width:        35.4mm (1.39") Width Neglecting Engine Mounting Flanges
                          44mm (1.73") Side to Side Mounting Hole Centers
          Height:         89mm   (3½")
          Muffler Length: 171mm (6¾")(Overall)
          Muffler Diameter: 40mm (1-9/16")
          Crankshaft Thread Size:      ¼-28
          Recommended Props: Break In: 10x7
             Trainer and Sport Models: 10x6, 10x7, 10x8, 11x6
                         Scale Models: 10x6, 10x7, 11x6, 11x7
          Operating RPM Range:         2,500 - 16,000 RPM

COMMENTS: ABC construction: Engine has an Aluminum piston and a Brass cylinder,
            Chrome plated. Cylinder is tapered and piston does not use a ring
            so a tight compression fit is made as piston comes to the top.
            Because of the precision tolerances, this engine feels "tight"
            before it is fully broken-in.
          If using the Slimline "Pitts" muffler with this engine, use
            GPMQ3020 for mounting screws.

           Factory Settings:
             High speed: 1½ turns OUT
             Low end: 2mm gap
             Idle speed: N/A- adjusted through throttle
                                                                   NNA 9/27/94

                                                                          ir/jl
                                                                upd NNA 8/29/02



– If you need more information, use these Tower Hobbies resources –

Click Here: Manufacturer's Product Web Page
E-mail: info@towerhobbies.com
Web Site: http://www.towerhobbies.com/
Phone: 217-398-8970


 
Postal Address:
Tower Hobbies
PO BOX 9078
CHAMPAIGN, IL 61826  








Click here for Units of Measure Conversion Calculators