On-line Videos:	Video 1 (1.5 MB) Video 2 (1.5 MB)
Instruction Manuals:	Manual 1 (689 KB) Manual 2 (46 KB)
Tower Catalog Page:	30
E-mail This Page To A Friend

        This is the radio controlled, glow powered, Almost Ready-to-Fly,
                    Hobbico NexSTAR .46 trainer airplane.
                         For Beginner Modeler/Fliers.

   ** This version does not include a radio, pilot assist link, engine, **
         NexSTAR Simulation Software, and the learn-to-fly guarantee.

                     With such features as SpinControl
              Airfoil Extensions, SpeedBrakes and Training Flaps
         no other trainer offers so much help for the first-time pilot.

FEATURES: Construction: Balsa and plywood
          Wings: CenterCore Molded Composite Main Wing Rib maintains perfect
            alignment and includes a built-in aileron servo mount, wing halves
            are joined with a steel rod.
            Flat bottom high mount configuration
            One-piece, all wood precision airfoil with SpinControl Airfoil
            Extensions that provide lift even in a stall to keep the
            NexSTAR level and the pilot in control.
            PivotFlex Wing Mounting System fastens with one 1/4-20x2 nylon wing
            bolt (GPMQ4402),a rubber retainer and pivoting channel absorb minor
            jolts of normal use, more severe jolts cause the wing to separate
            from the fuselage and escape the full force of impact.
          Airspeed Restrictor: SpeedBrakes Training Flaps attach to forward
            section of wing near fuselage and hold airspeed to a minimum to
            insure smooth landings, removeable as pilot skills increase
          Covering: Polyester based heat shrink, color scheme is White and Red
            with Silver accents. True Red TOPQ0227
          Landing Gear: Duraluminum SnapGear Quick Landing Gear Mounts,
            (US Patent #6,886,780) lock in place with a snap and provide the
            strongest landing gear of any trainer, also easily removeable
          Aileron Control: Requires single standard size servo, wings are built
            with dual aileron servo trays for future upgrades as skills
            increase, can also be equipped with flaps
          Tail Mounting: EasyAlign System guides parts into place automatically
            in perfect alignment without tools
          Building Time: Ready to fly in 3-5 hours
          Warranty Period: Hobbico guarantees this kit free from defects in
            both material and workmanship at purchase date. This warranty
            does not cover any component part damaged by use or modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies,
            pre-bent main landing gear with three 2¾" (70mm) foam main
            wheels, steerable nose gear, IsoSmooth aluminum and rubber engine
            mount, 9.1oz (270cc) fuel tank, 2¼" (57mm) red plastic spinner
            pushrods, linkages, and photo-illustrated instructions

REQUIRES: Radio: 4-channel
          Servos: Four standard size (1-throttle, 1-rudder, 1-elevator,
            1-elevator)
          Engine: .46 cu in (7.5cc) engine (*see comments below)
          Model airplane fuel
          Building and field equipment
          Charging Rx and Tx batteries

SPECS:    Wingspan:      68.75"     (1746mm)
          Wing Area:    722 sq in    (46sq dm)
          Weight:         6.5lb-6.75lb (2835g-3060g) ready to fly
          Wing Loading:  20-21 oz/sq ft (61-66g/sq dm)
          Length:        56"       (1420mm)
          Airfoil:         High-Wing
          Center of Gravity:  3-3/16" (81mm) forward limit
                              3-9/16" (90mm) aft limit from the wing's leading
            edge at the fuselage sides
          Control Throws-
            Elevator: Up & Down   ½"  (13mm)
            Rudder: Right to Left ¾"  (19mm)
            Ailerons: Up          ½"  (13mm)  Down 3/8" (9mm)

          Right Thrust Angle-3°
          Down Thrust Angle-4° wing respect to wing incidence

COMMENTS: Wings are equipped with dual aileron servo trays if dual aileron
            servos are desired. If you wish to use flaperons you will need to
            upgrade your radio system to 6 channels. The instruction manual
            list parts needed and information to perform these conversions.

          The metal straps described on page 13 for the engine mount are not
            included with the kit.

          If a replacement fuel tank is needed, an 8oz (240cc) tank like
            SULQ1739 can be used. Some minor modification may be needed as this
            is not the exact shape of the original tank

         *Because the .46LA dimensions are different than a bearinged engine,
            it will not work in this plane unless modifications are made. You
            will need a different engine mount. Depending on which engine
            mount is used, you may need to add aprox. 1/4" to 3/8" plywood
            to the firewall to extend the prop forward enough to keep it from
            contacting the fuselage.

         *If a Tower .46 is being use, you will need to use an muffler
            extension. The Dubro 699 Muffler Extension DUBG1319 will work fine.

         *The steel wing joiner rod used in this model can be substituted with
          the the rod from the Hobbico AviStar/SuperStar Select(HCAA3722)

                                                               updt jxs 3/08/04
                                                             update mcw 5/27/04
                                                                updt mcw 6/4/04
                                                               updt mcw 8/24/04
                                                           46LA updt tjt 052305
                                                      tower .46 updt tjt 071305
                                                       rod update     wm 071505



– If you need more information, use these Hobbico resources –

Click Here: Manufacturer's Product Web Page
E-mail: airsupport@hobbico.com
Web Site: http://www.hobbico.com/
Phone: 217-398-8970


 
Postal Address:
Hobbico
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators