Tower Catalog Page:	107
E-mail This Page To A Friend

           This is the 1/10 scale electric powered, radio controlled,
         almost ready to run Tamiya Rising Storm off-road Racing Buggy.
             This kit is part of Tamiya's XB (Expert Built) series.

FEATURES: Chassis: Plastic tub
          Drive: Four wheel shaft drive
          Motor 540 size
          Radio: Tamiya Expec SP AM pistol grip with steering and throttle
            trims, servo reverse and standard steering servo
          Ball bearings: Bearings located on spur gear shaft and inside diff
            case, bushings located on wheels
          Shocks: Four friction (not oil-filled) plastic bodied
          Gearboxes: Sealed front and rear
          Differentials: Planetary gear
          Transmission: Single-speed
          Body: Trimmed and painted buggy style with rear wing and all decals
            applied
          Tires: Spike treaded, Front, 3.25" (82mm) diameter, 1" (25mm) wide
            Rear, 3.25" (82mm) diameter, 1.5" (38mm) wide
          Wheels: 5-spoke white, Front, 2.25" (57mm) diameter, 1" (25mm) wide
            Rear, 2.25" (57mm) diameter, 1.5" (38mm) wide
          Speed Control: Electronic, with Kyosho type connector
          Bumpers: Front and rear black plastic
          Suspension: Double wishbone
          Camber Tie Rods: Fixed non-adjustable
          Steering Tie Rods: Fixed non-adjustable
          Steering: Bell-crank type (if this applies)
          Servo Saver: Included

INCLUDES: One Tamiya Rising Storm off-road Racing Buggy with Electronic Speed
            Control, painted body, tires, wheels, 2-ch pistol grip radio with
            standard servo, 19 tooth pinion gear, 70 tooth spur gear,
            instructions                                                      _

REQUIRES: Radio Batteries: Eight AA size
          Battery: 6-cell flat with standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:      15.5" (395mm)
          Width:        9.9" (251mm)
          Height:      5.75" (146mm)
          Weight:   2.9lbs  (1320g) without battery
          Wheelbase:   10.5" (267mm)
          Front Tread:  8.6" (219mm) side to side at wheel centers
          Rear Tread:  8.25" (209mm)
          Front Track:  9.5" (241mm)
          Rear Track:   9.6" (245mm)
          Ground Clearance:  1" (25.4mm)
          Tires- Front:  2.25" x 1" (57mm x 25mm)
                 Rear:   3.25" x 1" (82mm x 25mm)
            BODY-
          Length:   9.9" (251mm)
          Width:    6.4" (162mm) at widest point
                    2.5"  (63mm) behind from wheels (thinnest point)
          Height:   2.7"  (70mm)

COMMENTS: For replacement or upgrade to Ball Bearings use:
            Qty   Size      Location               Order Bearing Set Qty
            4     5x11mm    Front Wheels            2    DTXC1547
            4     5x11mm    Rear Wheels             2    DTXC1547
            4     5x11mm    Spur Gear Shaft         2    DTXC1547
            2     8x12mm    Differential            1    DTXC1581

          Body pictured on the box is painted orange and white with all decals
            applied.

                                                                    jxs 1/13/04
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators