This is a radio controlled, electric powered, foam construction
GWS E-Starter airplane.
For Beginner to Intermediate Modelers/Fliers.
FEATURES: Construction: Easy interlocking foam with built-in thrust angles
Wings: one piece, foam construction
Radio compartment: foam construction, molded in
Cowling: plastic nose cone and two plastic motor nacelles
Landing gear: 2mm diameter wire main and nose landing gear
Hardware: included
Motor: one 350 geared motor system with 4.43:1 gear box
Motor Mount: plastic motor mount/gear box with 62 tooth spur gear and
14 tooth pinion gear
Warranty: GWS, guarantees this kit free from defects in both
materials and workmanship at the date of purchase
INCLUDES: Foam fuse sides wing and tail section, 2mm diameter wire main gear
two 3" (76mm) diameter plastic main wheels, one plastic tail skid,
plastic cowling, foam glue, hardware kit, 350 motor with gear box,
one ep8060 8x6 prop, one ep9070 9x7 prop, decal sheet, balancing
putty, and photo-illustrated instructions
REQUIRES: Speed Control: 20A recommended
Battery: 7.2-8.4V AAA 500-730mAh or
7.2-8.4V 270-400mAh 2/3 AA or AA 600mAh NiCd
Charger: Timed or Peak
Radio: 3-4 channel
: 3 pico or naro (micro or mini) servo
(1-, 1-, 1-)
Servo Extension 6": For
Building and field equipment
SPECS: Wingspan: 37.8" (960mm)
Wing Area: 265sq in (17.1sq dm)
Weight: 16.9oz (480g)
: 9oz/sq ft (28g/sq dm)
Length: 30.54" (725mm)
Airfoil: High wing flat bottom
: Marked on the bottom of the wing, approximately
2.9" (73mm) behind of wing at side
Control Throws-
: Up & Down 5/16" (7.9mm)
: Up & Down ½" (12.7mm)
: Right & Left ½" (12.7mm)
Incidence-Not available per manufacturer
kpm01/25/2005
ir/jxs
– If you need more information, use these GWS resources – |
E-mail: service@gws.com.tw
Web Site: http://www.gws.com.tw/
Phone: 909-594-4979
|
|
Postal Address:
GWS
GRAND WING SYSTEM USA, INC.
138 S. BRENT CIRCLE
CITY OF INDUSTRY, CA 91789
|
Click here for Units of Measure Conversion Calculators
|