Additional Pictures:	Picture 1 Picture 2
On-line Videos:	Video 1 (12.6 MB)
Product Reviews:	Review 1
Instruction Manuals:	Manual 1 (571 KB)
Tower Catalog Page:	32
E-mail This Page To A Friend

       This is the radio controlled, glow powered, Almost-Ready-to-Fly,
                  Hobbico Twinstar Scale Trainer Airplane.
                For beginner to intermediate modeler/fliers.

FEATURES: Construction: Balsa and plywood
          Wings: Two piece balsa and plywood joins with plywood joiners,
            attaches with nylon bolts, left and right engine nacelles must be
            attached
          Engine Nacelles: Constructed of plywood, covered and trimmed
          Covering: Factory applied, iron-on, color scheme is White with Red,
            Blue and Black stripes on wing, fuselage and tail sections, Black
            sections simulate cabin windows
          Radio Compartment: Plywood reinforced, accessible from bottom of
            fuselage where wing attaches
          Cowling: Pre-painted fiberglass, White with stripes applied
          Landing Gear: Fixed tricycle style with  0.16" (4mm) diameter wires
          Wheels: Foam, three 2-3/4" (70mm) diameter
          Aileron Control: Single servo
          Spinners: Two 2" (51mm) constructed of plastic, Red in color
          Engine Mounts: Two nylon, adjustable
          Fuel Tanks: Two, approximate 4oz (120cc) capacity
          Building Time: Ready To Fly in several hours
          Hardware: Full set included
          Warranty Period: Hobbico guarantees this kit free from defects
            in both material and workmanship at purchase date. This warranty
            does not cover any component parts damaged by use or modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            pre-bent 0.16" (4mm) tricycle landing gear, three 2-3/4" (70mm)
            wheels, two engine mounts, two fuel tanks, two 2" (51mm) spinners
            wood servo trays and wing joiners, hardware package, engine
            nacelles, photo-illustrated instructions.

REQUIRES: Engines: Two .20 - .40 cu in (3.3 - 6.5cc) 2-stroke
                OR two .26 -.30 cu in (4.2 - 4.9 cc) 4-stroke
          Muffler: Sports-Style supplied with engine
            (Engines mount in an upright position)
          Radio: 4-Channel
          Servos:  5-Standard (1-Aileron, 1-Elevator, 2-Throttle, 1-Rudder)
          Y-Harness: One, for throttle servos
          Misc. Items: Glow plug, 1/2" foam rubber padding, medium fuel tubing,
            fuel, fuel filters, propellers, building and field equipment.

SPECS:    Wingspan:     56" (1420mm)
          Wing Area:    560 sq in (36.1 sq dm)
          Weight:        5 - 5.5lb (2270g - 2490g)
          Wing Loading:  21-23 oz/sq ft (64-70g/sq dm)
          Length:       50" (1270mm)
          Airfoil: Semi-symmetrical, low-wing placement
          Center of Gravity: 3-1/4" (83mm) Back from the wing's leading edge
          Control Throws-          High Rate        Low Rate
            Elevator: Up & Down     3/8" (9.5mm)     1/4" (6mm)
            Rudder: Right to Left   1"   (25mm)      7/8" (22.5mm)
            Ailerons: Up & Down     3/8" (9.5mm)     1/4" (6mm)

COMMENTS: If a replacement fuel tanks are needed, order the Sullivan 4oz
            tank (SULQ1737), or the DuBro 4oz tank (DUBQ0204).
            Some minor trimming and modifications may be required.

                                                                   jxs 02/15/05
                                                                         ir/jxs



– If you need more information, use these Hobbico resources –

Click Here: Manufacturer's Product Web Page
E-mail: airsupport@hobbico.com
Web Site: http://www.hobbico.com/
Phone: 217-398-8970


 
Postal Address:
Hobbico
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators