Tower Catalog Page:	107
E-mail This Page To A Friend

            This is the electric powered Ready To Run 1/10 scale
            Tamiya Mini Cooper '94 Monte Carlo Series on-road Car.
         This vehicle is part of Tamiya's XB (Expert Built) series.

FEATURES: Chassis:         Plastic tub M-03 design
          Drive:           Front wheel
          Radio:           Tamia Expec TTU-03 AM pistol-grip w/servo reverse,
                             steering and throttle trims and standard servo
          Motor:           540 motor with pre-attached leads
          Ball Bearings:   Installed in differentials, bushings in wheel hubs
          Shocks:          Friction, plastic body
          Gearbox:         Enclosed
          Differentials:   Bevel gear, ball bearing equipped
          Transmission:    Single speed
          Body:            .03"   (.8mm) polycarbonate, painted and trimmed
          Tires:           2.6"   (66mm) outer diameter
                             1" (25.4mm) wide racing radial type
          Wheels:          Silver 8-Spoke 1.5" (38.7mm) outer diameter
          Speed Control:   TEU-101BK Electronic, w/reverse & standard connector
          Bumpers: Front and rear, rigid plastic
          Suspension:      Fixed, non-adjustable
          Camber Tie Rods: Fixed, non-adjustable,
            (Camber refers to the angle at which the wheels sit vertically)
          Steering Tie Rods: Adjustable
            (Caster/Toe-in refers to the angle at which the wheels point inward
             as viewed from above)
          Steering:        Bell-crank type
          Servo Saver:     Included

INCLUDES: Tamiya Mini Cooper on-road car, pistol-grip transmitter, receiver,
            540 motor, ESC, painted body, tires, foam bumper, spoke wheels
            20 tooth pinion gear, spur gear, tube of grease, wheel wrench
            and instructions

REQUIRES: Radio Batteries: 8 AA size (for transmitter)
          Battery:         6 flat pack with standard connector
          Charger:         AC/DC Timed or Peak for 6-cell battery
          Misc. Items:     Building and track equipment

SPECS:      VEHICLE-
          Length:        11.3" (389mm)
          Width:            6" (152mm)
          Height:         5.6" (143mm) at rear body mount
          Weight:       2.2lbs   (990g) kit only
                        3.3lbs  (1490g) with battery, speed control, motor and
                                          radio equipment (approximate)
          Wheelbase:      8.1" (207mm)
          Tread: Front-and Rear 5.5" (140mm)
          Tires, F&R:   Overall Diameter,       2.2"   (55mm)
                        Overall Width,          .96" (24.5mm)
                        Inner Bead Diameter,    1.5"   (39mm)
             BODY-
          Length:        12.5" (319mm)
          Width:          6.1" (155mm)
          Height:        4.75" (121mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                       Bearing Set Qty.
            12   5x11mm   front diff gears, hubs         (use 6 DTXC1547)
             2    5X8mm   front diff gears               (use 1 DTXC1523)

          Body is painted Red and White with all body trim and sponsor decals
            from the '94 Monte Carlo race.

                                                                    jxs 3/31/05
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators