View Larger Picture

Additional Pictures:	Picture 1 Picture 2
On-line Videos:	Video 1 (26.4 MB)
Instruction Manuals:	Manual 1 (1.3 MB)
Tower Catalog Page:	52
E-mail This Page To A Friend

              This is a radio controlled, electric powered, foam
       Great Planes FlatOuts Flatana 3D Profile Park Flyer Airplane.
                       Park Pilot Program Legal Aircraft
                  For Intermediate to Advanced Modeler/Fliers.

FEATURES: Construction: 1/8" (3mm) thick foam w/ carbon fiber reinforcing rods
            to strengthen the infrastructure
          Trim: Blue, Red, White, Yellow, Green and Light Blue coloring
          Wings: 1/8" (3mm) thick foam with with carbon fiber leading edge
                 and trailing edge reinforcement
          Landing gear: Carbon fiber rods and composite axle supports
          Wheel Pants: 1/4" (6mm) thick White foam construction
          Building Time: Flight ready in 2-3 hours
          Hardware: Carbon fiber pushrods and wing struts, clip-hinge system
            on tail section allows up to 80° of deflection without binding and
            also pops loose in the event of a crash
          Motor: T-370 size Brushed (GPMG0310)
          Gearbox: 5:1 gear ratio, ball bearing-supported
          Propeller: 10x3.8 Slo-Flyer with prop saver
          Warranty: Great Planes Model Manufacturing Company guarantees this
            kit free from defects in both materials and workmanship at
            the date of purchase.

INCLUDES: Flatana foam construction 3D airplane, 370 size motor, 5:1 gearbox,
            10x3.8 Slo-Flyer prop, prop saver, carbon fiber rods and tubes,
            complete hardware package and photo-illustrated manual

REQUIRES: Speed Control: 7+A continuous current
          Battery: 3S 350-700mAh Lithium Polymer (LiPo) battery
                     **For optimum performance battery weight should not exceed
                       2.3oz (65g).**
          Charger: Lithium Polymer capable
          Radio: 4-channel with micro receiver
          Servos: 3 micro with a 15+ oz-in minimum torque rating
          Misc. Items: Foam-safe CA, building and field equipment

SPECS:    Wingspan: 36" (915mm)
          Wing Area: 241 sq in (15.5 sq dm)
          Weight: 7.5 - 9oz (215 - 225g)
          Wing Loading: 5oz/sq ft (15g/sq dm)
          Length:    31.5" (800mm)
          Airfoil: Flat plate
          Center of Gravity: 2.5" (63mm) Back from the wing's leading edge
            at the fuselage sides.
          Control Throws-

       Function    High rate endpoints  High rate travel  High rate exponential
       Aileron       +/- 100%           +/- 55-60°        40%
       Elevator      +/- 100%           +/- 55-60°        40%
       Rudder        +/- 100%           +/- 55-60°        40%
                   Low rate endpoints   Low rate travel   Low rate exponential
       Aileron       +/-  40%           +/- 15-25°         0%
       Elevator      +/-  40%           +/- 15-25°         0%
       Rudder        +/-  40%           +/- 15-25°         0%

COMMENTS: The ElectriFly 720mAh battery is not capable of delivering the
             current required by this system.

          If wanting an ultra micro receiver for competition flying only one is
            required depending on the channel of the radio selected (Low band
            Ch 11-35, High band Ch 36-60). Please note the Accessory Completion
            Guide lists both Low and High band receivers.
            Channel selection is left to the modeler's preference

          Please note that if you are ordering the Futaba 4YF (FUTJ36**) listed
            in the Accessory Completion Guide you will only need one more S3114
            servo, part number FUTM0414.

          If you are ordering the Micro receiver R124F you will need to order
          the S3114M servos, or servos with micro connectors. These are
          usually identified with an (M) located after the numbers such as
          S3114M.

                                                                    jxs 1/26/05
                                                                    ajw 7/12/05
                                                                         ir/jxs
                                                            updated rda 6/19/07



– If you need more information, use these Great Planes resources –

Click Here: Manufacturer's Product Web Page
E-mail: airsupport@greatplanes.com
Web Site: http://www.greatplanes.com/
Phone: 217-398-8970


 
Postal Address:
Great Planes
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators