On-line Videos:	Video 1 (15.4 MB)
Instruction Manuals:	Manual 1 (127 KB) Manual 2
Parts Express Eligible:	Yes
E-mail This Page To A Friend

     This is the DuraTrax 75MHz (channels 61-90) Radio Frequency Checker.

FEATURES: Automatically scans all thirty R/C frequencies in the 75MHz band and
            identifies those frequencies in use
          Each frequency is shown by a dedicated LED, LED showing channel in
            use stays lit and unit continues to scan
          300' (91m) range without external antenna, 1000' (305m) with external
            antenna (not included-available separately) see COMMENTS
          Pevents accidents due to unwanted Rf interference from other
            modelers' radio equipment
          Fits easily in pocket or car bag
          One year limited warranty

INCLUDES: One 75MHz DuraTrax Radio Frequency Checker

REQUIRES: 3 AAA cells (order two SANP3502)

SPECS:    Dimensions: 3.14" x 0.94" x 2.36" (80 x 24 x 60mm)
          Weight: 2.05oz (58g)
          Input Voltage: 4.5V DC
          Operational Current: 20-90mA
          Frequency Identifiers: 30 red LEDs
          Frequency Scan Time: 9 seconds
          Max Operational Temperature: 32°-104°F (0°-40°C)

COMMENTS: For clearest reception and best performance do not sit frequency
            checker on ground. Also do not aim transmitter antenna directly at
            frequency checker, as transmitter's weakest signal emits directly
            from the tip of its antenna.

          This frequency checker indicates when another R/C transmitter is on a
            particular channel. It's important to note that the frequency
            checker is NOT well suited to show very brief, intermittent Rf
            signals that could cause interference which may be present in the
            environment near or between R/C channels.

          When using the external antenna, extra channels might appear to be in
            use if the checker is physically located very near a Tx which is
            emitting a signal. Moving the checker several feet away from the
            Tx should clear the problem. If used inside buildings which have a
            lot of steel/metal in the structure, extra channels might
            inadvertently be shown and NOT using the external antenna may
            deliver the best results in this situation.

          The instruction sheet incorrectly states that "Range is up to 300
            meters w/o external antenna" and "Range is up to 1000 meters with
            external antenna". INSTEAD of "meters" it should say "feet" in both
             places.

          If needing a 72MHz frequency checker, order HCAP0340.

                                                                    jxs 3/29/05
                                                                         ir/jxs



– If you need more information, use these DuraTrax resources –

Click Here: Manufacturer's Product Web Page
E-mail: carsupport@duratrax.com
Web Site: http://www.duratrax.com/
Phone: 217-398-8970


 
Postal Address:
DuraTrax
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators