This is the Zinger 22x18 Wooden Pusher Propeller.
This propeller is cut the opposite direction than standard
propellers and is for applications requiring the propeller to
spin in a clockwise direction.
FEATURES: Constructed of maple
Fuel proof finish
INCLUDES: One Zinger 22x18 Wooden Pusher Propeller
SPECS: Hole Diameter: 0.24" (6mm)
Diameter: 22"
Pitch: 18
REQUIRES: Depending on the engine crankshaft size, the propeller may need to
be reamed to a larger size using an SAE (GPMQ5005),
or Metric (GPMQ5007) reamer.
COMMENTS: Four-stroke engines are typically higher torque engines and should
use the larger props indicated in the range.
Recommended prop ranges will vary depending on your particular engine
and airplane.
The chart below represents average prop usage and should be used as
a general guideline. Always refer to the manufacturer's
instructions included with your engine.
Engine Size 2-Stroke 4-Stroke
.049-.051 5.5x4, 5.5x4.5, 6x3, 6x3.5, 6x4 N/A
.09 -.10 7x4, 7x5, 7x6 N/A
.15 7x6, 8x4, 8x5, 8x6, 8x7 N/A
.20 -.25 8x6, 8x7, 9x4, 9x5 9x4, 9x5, 9x6, 9x7
.29 -.35 9x6, 9x7, 9x8, 9.5x6, 10x4, 10x5, 10x6 N/A
.40 9.5x6, 10x4, 10x5, 10x6, 10x8, 10x9 11x6, 12x6
.45 -.50 10x8, 10x9, 11x4, 11x5, 11x6, 11x7, 11x7.5 N/A
.60 11x5, 11x6, 11x7, 11x7.5, 11x8, 11x9 11x8,11x9,12x6,13x6
.71 -.80 12x6, 12x8, 13x6, 13x8, 13x10, 14x8 N/A
.90 13x6, 13x8, 13x10, 14x6, 14x8 11x9,12x8,14x6
1.08 14x8, 14x10, 15x8, 16x6 N/A
1.20 14x8, 15x8, 16x6 14x8,15x8,15x10,16x8
1.5 16x8, 16x10, 18x6, 18x8 N/A
1.8 18x8, 18x10, 20x6, 20x8 N/A
2.1 20x8, 20x10 N/A
2.7 -3.0 22x8, 22x10, 22x12, 24x8, 24x10, 24x12 N/A
jxs 3/29/05
ir/jxs
– If you need more information, use these Zinger resources – |
Web Site: http://www.zingerpropeller.com/
Phone: 310-539-2313
|
|
Postal Address:
Zinger
J & Z PRODUCTS
25029 SOUTH VERMONT AVENUE
HARBOR CITY, CA 90710
|
Click here for Units of Measure Conversion Calculators
| 
Yes
E-mail This Page To A Friend
