Instruction Manuals:	Manual 1 (435 KB)
E-mail This Page To A Friend

This is the Futaba CR-2500 Lithium, NiCd and NiMH Battery Charger & Discharger.
    The CR-2500 will charge the 14MZ, 12Z and FX-40 Lithium-ion batteries
                             from the transmitter.
                  Also charges NiCd, and NiMh batteries for
                       receivers, and glow starters.

FEATURES: Silver plastic with black plastic base
          Tx and Rx or Tx and Glow can be charged simultaneously
          Rx and Glow batteries cannot be charged siumltaneously
          Outputs on charger consist of Tx and RX and Glow
          Charges Lithium-ion battery used in the 14MZ transmitter
          Employs the Auto-Cut by constant current and voltage to manage peak
            detection for 14MZ, 12Z and FX-40 transmitter batteries
          Auto-Cut by the delta peak for receiver battery and glow starter
          Charging current for receiver and glow starter is adjustable
          LCD screen monitors, input voltage, output voltage, charging current,
           peak voltage, charging time, and charging amount
          Handles 4-6 cell receiver batteries
          Black cord with White mini adapter for hooking up alligator clips
          One year limited warranty

INCLUDES: One CR-2500 battery charger
          Two charging adapters, Futaba connector male and female ends
          Black charging adapter for charging battery while in transmitter
          Alligator clips with mini white connector for a 12V 6A or
            more power supply
          12V car battery cigarette socket

REQUIRES: Power supply, 12V 6A or more, DTXP4300 or HCAP0250

SPECS:    Input Voltage: DC11V-15V
          Operating Voltage: 10.5V
          Charging Current: Tx: 1.5A, Rx: 0.05A-2A, Glow: 1A-2.5A
          Discharging Current: Rx: 0.5A
          Battery Range: Tx: Futaba Li-ion 7.4V battery pack/2200mAh
                         Rx: 4-6 cells/50mAh-2000mAh
                         Glow: 1 cell/2000mAh-3000mAh
          Cut-off: Tx: constant voltage and timer/Rx, Glow: delta peak
          Case size: 5.9" x  3.3" x 1.4" (151mm x 85mm x 35mm)
          Weight: 12.9oz (365g)

COMMENTS: The CR-2500 was designed to charge the 14MZ, 12Z and FX-40 batteries
            while in transmitter. The Futaba adapter cable is only for the
            purpose of charging the batteries while in the transmitter. It will
            not charge the batteries from other Futaba transmitters.

                                                                     dew8-24-05
                                                                         ir/jxs
                                                                   updt 8/17/06
                                                            updated jpg 12/4/06



– If you need more information, use these Futaba resources –

E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators