Tower Catalog Page:	59
E-mail This Page To A Friend

   This is the radio controlled, electric powered Multiplex Easy Glider
                       almost ready to fly Sailplane.

FEATURES: Construction: Elapor foam to resist damage, white in color
          Wings: Two piece
          Motor: Permax Speed 400 geared
          Propeller: Folding (size not given)
          Spinner: Black plastic, 1" (25mm) in diameter
          Aileron Control: Dual servo
          Control Surfaces: Elevator, throttle, rudder and ailerons

INCLUDES: One Multiplex Easy Glider kit with 400 size motor, gearbox, decals
            propeller, spinner, hardware and illustrated instruction manual

REQUIRES: Radio System: 4-channel with micro receiver
          Servos: Two micro size for elevator & rudder
                  Two nano size for ailerons
          Servo Extensions: Two 24" (600mm) for aileron servos
          Y Harness: For aileron servos
          Battery: Multiplex 7-cell #15 6030 or 8-cell #15 6037 (as of this
            writing 8/08/05, these batteries are not carried) A battery pack
            can be assembled by wiring together 7 or 8 AA cells and gluing
            together with Shoe Goo, DTXC2460.
          Battery Charger: Timed or peak for type of battery used
          Building and Field Equipment: Medium viscosity CA glue and activator,
            see COMMENTS

SPECS:    Wingspan: 71" (180.3cm)
          Length: 44.25" (112.3cm)
          Flying Weight: 31oz (880g) with standard power system
          Wing Loading: 6.88 oz sq ft (21 g sq/dm)
          Wing Area: FAI approx. 226 sq in (41.6g/sq dm)
          CG (Center of Gravity): 2.7" (70mm) from leading edge at wing root
            measured at fuselage side
            Control Throws-
          Elevator, Up and Down:     0.51" (13mm)
          Rudder, Left and Right:    0.79" (20mm)
          Ailerons, Up:              0.79" (20mm)
                    Down:            0.31" (8mm)
          Spoilers-Both Ailerons Up: 0.79" (20mm)
          Elevator Mix with Spoiler: 0.20" (5mm) all figures approximate

COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
            the material using white or epoxy glue. Medium CA glue used with an
            activator is the only method of gluing recommended by the
            manufacturer.
          For Easy Glider without motor, order MPUA2105

                                                                    jxs 5/31/05
                                                                         ir/jxs



– If you need more information, use these Multiplex resources –

Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948


 
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators