This is the Onboard Electric Starter for the
Fuji Imvac BT-50 and BT-86 Series engines.
Fits the Fuji Imvac BT-50SA,BT-64, BT-50SB, BT-50EI
BT-86 and the BT-86EI engines.
When installing on the BT-86EI,
two decompression valves (FJIG4470) are required.
FEATURES: Eliminates the need for a field starter system, and offers more
realistic ignition through a toggle switch on the radio
Soft Start relay switch (FJIG9903) allows starter to spin up to speed
gradually for more reliability, less wear on the one-way bearing
Easy to install, relay is pre-wired with all connections required
for most systems
Drives the rearmost section of the crankshaft via a one-way bearing
Operates on a 12V power source; low resistance or battery
recommended
INCLUDES: Pre-assembled motor, gear unit with one-way bearing and aluminum
mounting plate, relay and ON/OFF switch, Kyosho and Tamiya type
battery connectors, two capacitors, two 40A fuses, Universal
receiver connector, mounting hardware
REQUIRES: 12V battery with at 1700mAh capacity, can use GPMP0353. 2-pin plug
from battery must be removed and connector from start unit
installed
COMMENTS: Do not operate continuously for more than 5 seconds
**Fuji Imvac is NOT related to the original Fuji Engines sold by MECOA**
jxs 6/27/05
ir/jxs
Click here for Units of Measure Conversion Calculators
|