Tower Catalog Page:	106
E-mail This Page To A Friend

           This is the 1/10 scale electric powered, radio controlled,
                     Tamiya TT-01R On-Road Car Chassis Kit.
      Competition ready chassis ideal for use in Tamiya Official Races.

FEATURES: Chassis: Plastic .098" (2.5mm) thick
          Drive: Four wheel aluminum shaft drive
          Motor: GT tuned, 25 turn
          Ball Bearings: Fully equipped
          Shocks: Four oil-filled CVA
          Gearboxes: Closed
          Differentials: Planetary gear
          Transmission: Single-speed
          Tires: Inner diameter: 1.8" (45mm) outer diameter: 2.5mm (64mm)
            1.1" (27mm) wide slicks
          Wheels: 5 spoke, Black, 1.8" (47mm) diameter, 1" (25mm) wide
          Bumper: Front urethane
          Suspension: Double wishbone, adjustable ground clearance
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when when viewed from front or behind vehicle
          Spur Gears: 55, 58 and 61 tooth plastic gears
          Steering: Bell-crank type
          Servo Saver: Included

INCLUDES: Tamiya TT-01R chassis with oil-filled shocks, 25T motor, slick tires,
            5-spoke wheels, 22 tooth pinion gear, 55, 58 & 61T spur gears,
            illustrated instructions
                                                                              _
REQUIRES: Radio: 2-channel with one standard servo
          Radio Batteries: 8 AA size
          Speed Control: Electronic
          Battery: 6-cell flat pack with standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery
          Body: 1/10 scale polycarbonate Tamiya TA03, TA04, TA05, TL01, TB01
            and TB02 type bodies will fit
          Paint: Polycarbonate safe
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:      15" (380mm)
          Width:      7.2" (183mm)
          Weight:      1.96lbs (890g)
          Wheelbase: 10.1" (257mm)
          Tread:      6.2" (157mm)
          Gear Ratio:  7.2:1

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location               Qty.  Bearing Set
             1   5 x 11mm   Spur Gear               1    DTXC1547
             2   8 x 12mm   Rear Diff               1    DTXC1581
             2   5 x 11mm   Rear Diff               1    DTXC1547
             2   5 x 11mm   Rear Axles              1    DTXC1547
             2   8 x 12mm   Front Diff              1    DTXC1581
             2   5 x 11mm   Front Diff              1    DTXC1547
             2   5 x 11mm   Front Uprights          1    DTXC1547
             2   5 x 11mm   Front Wheels            1    DTXC1547
             2   5 x 11mm   Rear Wheels             1    DTXC1547

                                                                    jxs 8/30/05
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators