Tower Catalog Page:	33
E-mail This Page To A Friend

       This is the radio controlled, glow powered, Almost-Ready-to-Fly,
           Phoenix Models Tiger Shark F-20 Sport Aerobatic Airplane.
                 For Intermediate to Advanced Modeler/Fliers.

FEATURES: Construction: Balsa and plywood
          Wing: One-piece joined together with aluminum dihedral brace
          Covering: Factory applied iron-on Red and White Oracover
          Radio Compartment: Plywood reinforced, accessible under wing
          Cowling: Pre-painted Red, fiberglass
          Canopy: Single, solid color Silver
          Landing Gear: Two main wires with nose gear wire, all 0.16" (4mm)
            diameter
          Aileron Control: Dual servo
          Engine Mount: Nylon
          Spinner: Red plastic
          Wheels: Three rubber treaded 2.4" (60mm) diameter
          Fuel Tank: Approximate 14oz (420cc) capacity
          Building Time: Ready to fly in several hours

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            pre-bent 0.16" (4mm) landing gear, three 2.4" (60mm) wheels,
            nylon engine mount, 2.5" (64mm) spinner, 14oz (420cc) approx.
            capacity fuel tank, wood servo trays aluminum wing joiner, hardware
            package, foam padding and photo-illustrated instructions.

REQUIRES: Engine: .40 -.46 cu in (6.5 - 7.5 cc) 2-stroke
               OR .52 cu in (8.5 cc) 4-stroke
          Muffler: Sports-style supplied with engine. Engine mounts on its
            side with cowling cut away to expose engine and muffler
          Radio: 4-Channel
          Servos: 6-Standard (2-Aileron, 1-Elevator, 1-Throttle, 1-Rudder
            1-Nose Gear)
          Y-Harness: One, for aileron servos
          Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing,
            fuel filter, propeller, building and field equipment.

SPECS:    Wingspan: 56.7" (1440mm)
          Weight: 5.73lb   (2600g)
          Length:   52.8" (1340mm)
          Specs such as Wing Area and Wing Loading are not provided by the
            manufacturer
          Airfoil: Fully-symmetrical low-wing
          Center of Gravity: 5.9" (150mm) Back from the wing's leading edge at
            the fuselage
          Control Throws-
            Elevator: Up & Down   0.47" (12mm)
            Rudder: Right to Left 0.59" (15mm)
            Ailerons: Up & Down   0.31"  (8mm)

COMMENTS: The box states that wheel pants are included. This is incorrect-they
            are not used with this kit.

          If a replacement fuel tank is needed, order the Sullivan 14oz flex
            tank (SULQ1742), or the DuBro 14oz tank (DUBQ0214).
            Some minor trimming and modifications may be required.
                                                                    jxs 9/07/05
                                                                         ir/jxs



– If you need more information, use these Phoenix Models resources –

E-mail: airsupport@greatplanes.com
 
Postal Address:
Phoenix Models
1608 INTERSTATE DRIVE
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators