This is a Hobbico TorqMaster 90 Deluxe 12V Starter.
It is designed for starting Glow Engines up to .90 cubic inches in size.
*** 2-Year Warranty ***
FEATURES: An Aluminum Starter Cone with V-Groove for Boat Starter Belts and
Round Rubber Insert for Airplane Spinner Cones.
Starter has Self-Adjusting Carbon Brushes for Longer Lasting Useage
and Constant Contact with the Armature.
Easy-Press Start Switch makes Starting Easy Without Requiring Heavy
Finger Pressure and a built-in Finger-Guard promises Safe Starts.
Pre-Attached Alligator Clips for easy attachment to a 12V battery
INCLUDES: One TorqMaster 90 Deluxe 12V Starter w/5' Cord & Alligator Clips.
SPECS: Winding Resistance: 1.3 ohms Brush width: 3/16"
Weight: 3lbs and 6oz Current Draw: 11.6A load
Armature length: 2" RPM: no load 4500rpm, load 3100rpm
# of commutator contacts: 10 or 12 Measured torque: 310 oz-in at stall
Shaft thread size- 6mm-1.0mm
REQUIRES: A 12V DC power source such as HCAP0800 or HCAP0901
COMMENTS: Panel-Ready Version with pre-installed banana plugs is HCAP3205
The replacement rubber insert is HCAP3315 and aluminum cone HCAP3310
Optional Rubber Adapters are as follows:
Rubber Donut for Cars, use HCAP3320
Jumbo Insert for Large Spinners, use HCAP3330 and HCAP3325
Blue Insert for Airplanes, use MPRP1410
Pink Insert for Spinner Nuts or Rear Start Helis, use MPRP1420
Optional Starter Belts for Boats, Use: AQUB9530 (15"),
AQUB9531 (17") and AQUB9532 (19")
JAL 9/15/98
ir/jl
Click here for Units of Measure Conversion Calculators
| 
E-mail This Page To A Friend
