View Larger Picture

E-mail This Page To A Friend

    This is the Team Integy INDI 16x405 D2 Charge/Discharge/Cycle System
                     for NiCd & NiMH Battery Packs.

FEATURES: The display is a Indigo blue backlit LCD 2x16
          This unit accepts 12V DC or 110-120V AC input
          1-10 cell charging, discharging, & cycling
          Programmable memory slots
          Data recall on all battery vital information
          Fuzzy logic charge mode provides discharge before charge
          User mode selection ring tone,
          Temperature probe is included
          Adjustable temperature cutoff
          Built-in temperature controlled cooling fan

INCLUDES: INDI 16x405 D2 Charger
          AC Cord
          Battery Cell Temperature Sensor
          DC Cord (Banana plug to Alligator Clips)

REQUIRES: Optional DC Power Supply 11.5V to 14.5V

SPECS:    Input Voltage:               DC Input 11.5-14.5V & AC Input 100-120V
          Charge Current:              NiCd/NiMH 0.1-5.0A     0.1A/Step
          Discharge Current:           NiCd/NiMH 0.1-10.0A    0.1A/Step
          Discharge Cutoff Voltage:    NiCd/NiMH 0.1-16.8V    0.1V/Step
          Volt Threshold:              NiCd/NiMH 3-25mV/Cell  1mV/cell?step
          Smart Trickle:               NiCd/NiMH 5% of Charge Current
          Battery Cell:                NiCD/NiMH 1-10 Cell
          Magnetic Buzzer:             Start/Error/Peak Sound
          Control Switch:              Membrane Switch
          Cycling:                     1-3 Times
          Battery Type:                NiCd/NiMH
          Output Type:                 Wire Cable
          Charge Modes:
            Charge (Normal, Fuzzy Logic)
            Discharge
            Cycle (Discharge>Charge>Discharge)

          Length:    8"     (203mm)
          Width:     6-7/8" (175mm)
          Height:    2"      (51mm)

COMMENTS: The "Fuzzy Logic" charge mode is especially useful for packs with
            a partial charge. The unit would first discharge your pack
            according to your preset discharge rate and then fully charge your
            pack.

                                                                    11-3-05 JBM
                                                                         ir/jxs



– If you need more information, use these Integy resources –

E-mail: integy1@aol.com
Web Site: http://www.integy.com
 
Postal Address:
Integy
4010 VALLEY BLVD #110
WALNUT, CA 91789  








Click here for Units of Measure Conversion Calculators