View Larger Picture

Tower Catalog Page:	84
E-mail This Page To A Friend

 This is the Castle Creations PHOENIX-85 High Voltage Electronic Speed Control.
                  For use with Brushless motors only.

FEATURES: Extremely Low Resistance (.0015 Ohm)
          High rate adjustable switching
          Up to 85A max continuous current
          Dual Opto-Coupled (No BEC)
          Up to 36 cells or 12S Lithium Polymer - Maximum
          16 cells or 3S Lithium Polymer - Minimum
          10AWG wiring for motor and battery leads
          Aluminum heatsinks (anodized Green)
          Dynamic braking ensures folding props fold promptly
          User Programmable Features:
           -Low-voltage cutoff with Auto-LiPo detect as default
           -Over-current Protection
           -Brake Type
           -Throttle Range - Fixed/Self-Adjusting/Governor
           -Timing Advance
           -Cutoff Type
           -Soft Start Ramp Up
           -Switching Frequency
          Runs motor in forward OR reverse
          Overtemp Motor Cutoff with Reset
          Safe "Power On" arming program ensures motor will not accidentally
            turn ON.
          Low torque "soft start" prevents damage to fragile gearboxes
          Auto Shut Down when signal is lost or because radio interference

INCLUDES: One PHOENIX-85 High Voltage speed control w/Universal connector
          One set of instructions
          One small "Castle Creations" decal

REQUIRES: Bullet-type motor connectors.
            Suggested Connectors: 4mm (GPMM3114 GPMM3115)
          Battery Connectors - depends which connector is used on battery.
            Suggested Connectors: Ultra plugs (WSDM3001)

SPECS:    Speed control body length:             2.8"  (71mm)
          Speed control body width:              1.6"  (41mm)
          Speed control body thickness:           .9"  (23mm)
          Motor wire lead length:                  5" (127mm)
          Battery wire lead length:                7" (178mm)
          Servo wire lead length:                 12" (305mm)
          Continuous current:                    85A
          Up to 36 cells or 12S Lithium Polymer: Maximum
          16 cells or 3S Lithium Polymer:        Minimum
          Wire size for motor and battery leads: 10AWG

COMMENTS: This speed control does NOT feature BEC. You must use an alternate
            power source for your receiver and servos.

                                                                    NNA 8/23/05
                                                                          ir/kh



– If you need more information, use these Castle Creations resources –

E-mail: support@castlecreations.com
Web Site: http://www.castlecreations.com/
Phone: 913-390-6939


 
Postal Address:
Castle Creations
235 S KANSAS AVE
OLATHE, KS 66061  








Click here for Units of Measure Conversion Calculators