E-mail This Page To A Friend

    This is a box of two 11-1/2" Wide 3mm Thick Cellfoam 88 Foam Sheets
                                from Midwest.
       3mm thick Cellfoam is typically used for lighter weight airplane
         models and those with full-bodied airframe structures

FEATURES: Teflon coated ceramic calibration die faces produce tough ding
            resistant outer skin
          Cuts with hobby knives, razor blades and hot wire machines
          Can be painted with water based, enamel, latex and silk flower paints
          Accepts permanent markers, stickers and vinyl transfers
          Accepts epoxy, water based contact cement, wood glue, craft glue,
            polyurethane wood glue, hot melt glue, spray contact cement
            and foam safe CA glue
          Sandable edges and surface
          Easily cut to shape to represent simple land elevation and landscape
            scenery for architectural designers and model landscape builders
 _        Can also be used to create building structures
          Will not absorb water and is acid free

INCLUDES: Two 11-1/2" Wide 3mm Thick Cellfoam 88 Foam Sheets

SPECS:    Length: 47" (1194mm)
          Width: 11-1/2" (292mm)
          Thickness: 1/8" (3mm)

COMMENTS: If using CA glue it MUST be the foam-safe type. Regular CA glue will
            destroy the foam.

                                                                    jxs 3/09/06
                                                                         ir/jxs



– If you need more information, use these Midwest resources –

E-mail: customerservice@midwestproducts.com
Web Site: http://www.midwestproducts.com/
Phone: 800-348-3497


 
Postal Address:
Midwest
PO BOX 564
HOBART, IN 46342  








Click here for Units of Measure Conversion Calculators